Mounting Radio and cup "holes"

Chisoxguy13

Radio won't be here till tomorrow, but was trying to figure out how I'm going to mount it. Gonna put it where the ball holder is and have a wood grain dash cover. Should I get a single DIN adapter "radio is KENWOOD KMR330 MARINE radio, single DIN" to mount in there to slide the radio in? Have some decent wood that I can use if needed to fab something. Also where the cupholders were they took out the cupholder form so when the dash is on there and you try to put something in the cupholder "hole" it falls all the way to the bottom of the tray in there because there is no formed cupholders, just four holes and open space angled down. Gonna put some wood in there so it's flat. We'll see how that turns out.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

ZZTOP

sounds like you have a good plan, let us know how it turns out, take lots of pics of the install--

DOOmsman

Go to a marine catalog and they have replacement cup hole cups(tubs).

Chisoxguy13

Anyone got any suggestions for mounting the radio?

JG!

Heres where I mounted mine you can even put it where I have my switches.



Heres the picture of the pods I have

rib33024

Check these out---





http://www.buggiesgonewild.com/elect...cessories.html

http://www.buggiesgonewild.com/desig...allations.html

Chisoxguy13

I had read those, but hadn't seen anything about that actual installation of it. Got it done Wednesday night "4AM Thursday morning" and will post pics tomorrow. Ended up working out pretty good I'd say other than big lack of sleep.