? about alltrax controller prog vs non

goofymaz

will there be a torque difference in a 400amp alltrax programmable controller vs the non programmable? what are the differences/ advanages to having a programmable controller! the same amperage as the non of course!! thanks!

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

goofymaz

ME

goofymaz

another ? do i need to change my diode and or resistor when i go to an alltrax controller! is it a must?

gornoman

Diode and resistor are linked to pack VOLTAGE not controller AMPERAGE. Your old ones will be fine on 36 volts with a new controller.

goofymaz

k thanks! do you know what the differences are from non programmable controller to programmable? what will i be able to do difference with a programmable controller? and will i see a difference is performance/speed/torque if i go with the programable vs the non!???!!! thank!!!

scottyb

I think in the end a non programmable controller of say 400amps will ultimately deliver the same 400 amps that a programmable model will. You can slow or choke the programmable model but you cannot boost it....
Lets wait and hear what the experts have to say on this....
I have done some side by side tests on this....

gornoman

Goofy, I have never tested the difference, but if you don't think you ever want to "tweak" the setting parameters, then don't bother with the AXE unit and get the non-programmable one. I would guess they performance would be the same.

Russ/TN

You might go to the alltrax website and download the controller pro software
(it is a tiny file)
Then you can see what the options are, and whether or not you want to be able to tweak them.

goofymaz

thank you! that help!! thanks again guys! pulled through as normal! doing the body work on my cart! ill be posting some paint pics here really soon!!!

scottyb

I took 2 identical carts one with a 650 AXE set to 100% throttle set to inductive (fastest I think) and ran it next to a 450 non programmable controller from Logisystems. Both carts were conversions running 36v motors on 48v Identical yr and tires etc, GPS within .5 mph the same and the 650 being only a bit faster off the line... hope this helps.....