|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-27-2010, 08:17 AM | #1 |
Not Yet Wild
Join Date: Apr 2010
Posts: 2
|
'94 EZ Go Tie Rod End Replacement
I am trying to remove and replace the front tie rod ends that attach to the wheels from my '94 EZ Go...I removed the cotter pin and then made a few turns on the nut before the both the nut and screw began turning. I cannot find anywhere to hold the screw to keep it from turning...do I need to just cut it off, or am I missing something here. Any help/suggestions would be appreciated?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-27-2010, 10:23 AM | #2 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: '94 EZ Go Tie Rod End Replacement
Welcome
I use a C clamp, take the C clamp and tighten the tie rod end down in to the socket with a little pressure, spray the threads with some WD 40, and you should be able to get it off |
04-27-2010, 10:28 AM | #3 |
Not Yet Wild
Join Date: Apr 2010
Posts: 2
|
Re: '94 EZ Go Tie Rod End Replacement
Thanks for the suggestion- I will give that a try.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
OBC Replacement | Electric Club Car | |||
shock replacement | Electric Club Car | |||
Replacement Air Filter | Gas EZGO | |||
Replacement DS bodies? | Gas Club Car | |||
Top End Replacement | Gas EZGO |