Its-pot Volts

kirkroediger · 02-01-2008, 03:08 PM

What Should The Pot Volts Be, Im Reading .1- .3 It Is A Pds Cart, Thanks, Kirk

Nate · 02-01-2008, 03:49 PM

What the voltage should be is an advanced question that only the controller designer would know. EZ-GO is typically 0-5k ohms when nothing is connected to the pot wires but an ohmmeter.

kirkroediger · 02-01-2008, 04:12 PM

thanks nate, im getting 1-5 disconnected, kirk

kirkroediger · 02-01-2008, 04:14 PM

error, i meant 1-3

roady89 · 02-01-2008, 09:11 PM

An ITS throttle assembly is not a potentiometer type throttle. If I remember correctly the voltage on an ITS type throttle runs from 1-5 vdc. 1 being no throttle 5 being wide open. Don't quote me on that because its been a while. If I get a chance tommorow I will check the voltage on Muaythia's cart at no throttle and wide open.

Nate · 02-01-2008, 10:10 PM

Roady, I did not know if PDS used an inductive throttle or not. Sorry kirkroediger.

02-01-2008, 03:08 PM	#1
kirkroediger Not Yet Wild Join Date: Jan 2008 Posts: 14	Its-pot Volts What Should The Pot Volts Be, Im Reading .1- .3 It Is A Pds Cart, Thanks, Kirk
kirkroediger Not Yet Wild Join Date: Jan 2008 Posts: 14

02-01-2008, 03:49 PM	#2
Nate Gone Wild Join Date: Dec 2006 Posts: 372	Re: Its-pot Volts What the voltage should be is an advanced question that only the controller designer would know. EZ-GO is typically 0-5k ohms when nothing is connected to the pot wires but an ohmmeter.
Nate Gone Wild Join Date: Dec 2006 Posts: 372

02-01-2008, 04:12 PM	#3
kirkroediger Not Yet Wild Join Date: Jan 2008 Posts: 14	Re: Its-pot Volts thanks nate, im getting 1-5 disconnected, kirk
kirkroediger Not Yet Wild Join Date: Jan 2008 Posts: 14

02-01-2008, 04:14 PM	#4
kirkroediger Not Yet Wild Join Date: Jan 2008 Posts: 14	Re: Its-pot Volts error, i meant 1-3
kirkroediger Not Yet Wild Join Date: Jan 2008 Posts: 14

02-01-2008, 09:11 PM	#5
roady89 Brkn it dwn BaRnEy StYlE Join Date: Jun 2007 Location: Kaufman, Texas Posts: 3,414	Re: Its-pot Volts An ITS throttle assembly is not a potentiometer type throttle. If I remember correctly the voltage on an ITS type throttle runs from 1-5 vdc. 1 being no throttle 5 being wide open. Don't quote me on that because its been a while. If I get a chance tommorow I will check the voltage on Muaythia's cart at no throttle and wide open.
	Golf Carts \| Lifted Golf Carts \| Electric Golf Carts Custom EZGO \| B&S V-Twin \| All Sports Long Travel Lift \| 8:1 Gears \| 22" Titan AT489's \| \| \| \| \| \| \|

02-01-2008, 10:10 PM	#6
Nate Gone Wild Join Date: Dec 2006 Posts: 372	Re: Its-pot Volts Roady, I did not know if PDS used an inductive throttle or not. Sorry kirkroediger.
Nate Gone Wild Join Date: Dec 2006 Posts: 372

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Converting 98, G16 from 36 to 48 volts	Electric Yamaha
12 volts source	Big Block Talk!
extra volts	Extreme DC!
72 volts all with 6 volts?	Extreme DC!
12 volts with key ON?	Gas Yamaha