|
|||||||
| Notices |
| Electric EZGO Electric EZGO Marathon, Medalist, TXT and RXV. |
|
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
#1 |
|
Not Yet Wild
Join Date: Feb 2008
Posts: 5
|
Hey guys, I have a 1998 electric ez go. 8.1 D&S motor and 600 amp D&S controller. The problem is when you push the gas petal, sometimes It wont go at all and other times it is straight full power.
What do I need to check? I had it bouncing around on a trailer and when I got to the house , it was like this. |
|
|
|
|
|
|
|
|
#2 |
|
Two Cheeks Sliding
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 2,303
|
If it was REALLY bouncing I would check ALL large cables. Give each a good tug and twist.
|
|
|
|
|
|
#3 |
|
Not Yet Wild
Join Date: Feb 2008
Posts: 5
|
All my cables are tight. Checked them first.
|
|
|
|
|
|
#4 | |
|
Gone Wild
Join Date: Jan 2007
Location: Liberty SC
Posts: 537
|
Check the wires from the speed senor under the floor ITS switch. Make sure they haven't been bounced loose. Just how much bouncing did it do?
Check the small terminal's of the controller and make sure they are tight. Quote:
|
|
|
|
|
|
|
#5 |
|
Not Yet Wild
Join Date: Feb 2008
Posts: 5
|
Thanks for the help Andy4639. The cart was straped down, what I should have said is that the roads are bumpy and the trailer was bouncing.
I do live where they are alot of gravel roads. |
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Carb Problem | Gas Club Car | |||
| speed problem | Electric EZGO | |||
| Electrical Problem | Electric Club Car | |||
| G1 up hill problem... | Gas Yamaha | |||
| need a help with no go problem | Electric Club Car | |||