This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|08-01-2010, 03:10 PM||#4|
Join Date: Jun 2010
Location: Central Florida
Re: test an ez go key switch
Testing the switch is simple. test the total pack voltage. Remember this number. Hook the black probe to the 36v- on the battery pack and the red probe on the back of the keyswitch. on 1 of the wires at the back of the keyswitch you should see constant pack voltage, on the other wire, you should see voltage only when the key is in the on position.
As for the F&R on there, you perform the same test. Center pin should have constant voltage, top pin should have voltage only when cart is in reverse and bottom pin should have voltage only when cart is in forward.
Hope that helped.
|Thread Tools||Search this Thread|
|forward/reverse switch change to toggle switch||Electric Club Car|
|Just got a G9 need to know how to wire ignition switch to push pull switch ASAP!||Gas Yamaha|
|Test For Wiper Switch?||Electric Club Car|
|Here is my serial # and Model # how do I test the switch in the floor?||Electric EZGO|
|Solenoid, switch or wire?? How do I test?||Gas Club Car|