|
|||||||
| Notices | ||
|
| Electric EZGO Electric EZGO Marathon, Medalist, TXT and RXV. |
|
  |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|||||||
| Notices | ||
|
| Electric EZGO Electric EZGO Marathon, Medalist, TXT and RXV. |
|
|
| |
|
|
Thread Tools | Search this Thread | Display Modes |
04-01-2008, 06:41 PM
|
#31 |
|
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 940
|
Re: 70's 36 volt problem
Maybe one of these can help you sort this monster out.
Good luck.    |
|
|
|
|
|
|
04-01-2008, 07:26 PM
|
#32 |
|
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 940
|
Re: 70's 36 volt problem
FWIW:
For your reference this is the interior of a 1986 Marathon. (b4 frame off resto) I concur with napalaz. 70's era body/frame with some changes to suspension points and a mid to late 80's era rear end and motor. I believe that rear axle and motor were used up to 1994.  |
|
|
|
|
04-01-2008, 07:29 PM
|
#33 |
|
Gone Wild
Join Date: Jan 2008
Posts: 155
|
Re: 70's 36 volt problem
NOOOOOOOOOO!!! If his is a late 70s model, he needs this one:
 Just downlaod the pic, enlarge it to fit an entire sheet of paper, and print it out!!! Its the one I'm using for my late 70s model... |
|
|
|
|
06-23-2008, 11:20 AM
|
#34 |
|
Not Yet Wild
Join Date: Jun 2008
Posts: 7
|
Re: 70's 36 volt problem
Howdee gents,
I too got me an ezgo with most of the wires disconnected. I guy I bought it from said to redrill his epoxied burnt board. I bought a new one from Powell.com for 12 bucks. I have seen conflicting diagrams. Since my serial number ends in 79 I think that 1979 is what I have. WIRING using the above diagram leaves a few unanswered questions...so here goes 1. I have 4 wires from the coils ok np there, but I have another one labeled 4 and the drawing is unclear to me where it goes maybe the A2 post on rh side of motor goes ahead of the 4 in the speed board? 2. Next I have a microswitch that seems to want to be mounted to ride the cam of the throttle at on the Accelerator Switch Assembly similiar to t6he one I borrowed in my drawing but on the other side of the board. Is this the correct location? 3 Does the Main Accelerator Switch Assembly power go to the solonoid? if so what side it correct? 4 Is this the charger? 5 The motor has two more posts and wires where are they supposed to go? I will upload pics tonight when I get home |
|
|
|
|
06-23-2008, 11:46 AM
|
#35 |
|
Not Yet Wild
Join Date: Jun 2008
Posts: 1
|
Re: 70's 36 volt problem
Hello From West Texas. I Just Joined The Community. I Need To See If Anyone Out There Has A Wiring Diagram For A 1985 Ez Go Three Wheeler. Thanks Al
|
|
|
|
|
06-24-2008, 10:27 AM
|
#36 | |
|
Not Yet Wild
Join Date: Jun 2008
Posts: 7
|
Re: 70's 36 volt problem
Quote:
Ok here are the pic and yes i do have four posts on the motor I jsut dont know where they should go if you look at the wiring diagram you can see differences so I was hoping some body knows |
|
|
|
|
|
06-24-2008, 11:17 AM
|
#37 |
|
The Welcome Guy
Join Date: Jan 2007
Location: Wichita Falls Texas - My Rides 1996 E-Z-GO and 2002 Club Car IQ and 2003 Club Car IQ
Posts: 3,045
|
Re: 70's 36 volt problem
Welcome to the forum horsestuff....................
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 48 volt charger NEW NEW NEW | Golf Carts and Parts | |||
| volt gauge | Gas EZGO | |||
| For Sale 16-18 volt to 12 volt converter *Sold* | Golf Carts and Parts | |||
| 98 club car 48 volt | Electric Club Car | |||
| 48 volt to 110 volt inverter | Golf Carts and Parts | |||
Linear Mode
