|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-17-2010, 07:05 PM | #1 |
Not Yet Wild
Join Date: May 2010
Location: Elgin Il.
Posts: 28
|
96 txt dcs need help please
I have a 96 txt dcs. I was riding the cart, stoped for a moment stepped on the petal and nothing. Towed it back to the house. tried it again in forward & rew. The soliniod clicks once, and dose not disengage until you turn off the key or swich from forward or rew. I left the tow run switch in run came back the next weekend the bats were dead. recharged the bats Still just ckicks once, and dose not move. Reed switch is already bypassed. Bats are good conections are tight. Need ANY help I can get.
Thanks Boompa.. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-17-2010, 07:56 PM | #2 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,286
|
Re: 96 txt dcs need help please
Check the ITS micro in the box under the floor mat.
|
08-18-2010, 06:40 AM | #3 |
Not Yet Wild
Join Date: May 2010
Location: Elgin Il.
Posts: 28
|
Re: 96 txt dcs need help please
Thanks for the reply. How do I test the micro switch?
|
08-18-2010, 06:45 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: 96 txt dcs need help please
Put a battery cable on the solenoid from one large terminal to the other large terminal. If the cart does not run it is a blown controller. If it does run replace the solenoid and resistor board.
|
08-18-2010, 05:23 PM | #5 |
Not Yet Wild
Join Date: May 2010
Location: Elgin Il.
Posts: 28
|
Re: 96 txt dcs need help please
Thanks scottyb I'll give it a try tonight..
|
08-18-2010, 07:38 PM | #6 |
Not Yet Wild
Join Date: May 2010
Location: Elgin Il.
Posts: 28
|
Re: 96 txt dcs need help please
Hi it's boompa again, I jumped the sol nothing I put a new ITS in and a new alltrax 300
got my green light and still a no go. the only thing I have not changed is the micro switch. I did a continuity check I have continuity when the pedal is pushed. I am out of ideas. ANY help would be great.... Thanks Boompa |
08-18-2010, 08:22 PM | #7 |
Not Yet Wild
Join Date: May 2010
Location: Elgin Il.
Posts: 28
|
Re: 96 txt dcs need help please
THANKS for all the help, but it turns out I'm a dumb a.. I found a loose stud on the motor. changed the cable end and it runs. Is there any way to tighten the stud with out messing up?
Thanks Boompa.. |
08-18-2010, 10:59 PM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: 96 txt dcs need help please
yes. Do not let the stud turn, that is why they put 2 nuts on it.....
|
08-19-2010, 03:47 AM | #9 |
Say What ???
Join Date: Aug 2008
Location: DFW Texas Baby !!
Posts: 621
|
Re: 96 txt dcs need help please
Good News......... You got a better controller !!
Bad News........... Now ya gonna have to keep modding it cause you have the bug |