|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-28-2010, 03:32 PM | #1 |
Not Yet Wild
Join Date: Jan 2010
Location: Bako, CA.
Posts: 38
|
Rear Deck for a 01 PDS
Hi everyone,
I have a couple of upgrades i would like to do to my cart and i was hoping some of you might be able to help me out with some ideas. First thing i need is a foot rest for the back seat, i have searched the forums and haven't come up with anything on this topic. I would like to buy one, but if need be, i can fabricate something. I looked on MMT and a couple other vendors but didn't see anything that would work. I also need to rebuild the front end, it looks like the shocks and bushings are toast, even though this thing hasn't seen much use. Can i just replace the bushings, or do i need to replace the shocks too? And lastly, how can i tell if I have the HD rear leaf springs? I just assumed i did becase the cart was originally outfitted with the truck bed. Attachment 38182 |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-28-2010, 03:45 PM | #2 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: Rear Deck for a 01 PDS
For your rear foot deck on the back, you will probably need to fab one. You can buy just the bushings they will come with the new washer nut and of coarse the rubber part. Look at your rear leaf springs, 2,3 or 4 leafs, 3 and 4 leafs are considered heavy duty springs while two is just standard.
|
09-29-2010, 11:00 AM | #3 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: Rear Deck for a 01 PDS
I have seen customer make a rear foot rest out of an old nerf bar (side bar) from a truck. They add a 2" receiver to the cart and weld a 2" square to that tube and you have a step.
|
09-29-2010, 12:57 PM | #4 |
Gone Wild
Join Date: Jul 2009
Location: Liberty Lake, WA.
Posts: 1,762
|
Re: Rear Deck for a 01 PDS
I wish I could remember who did this. But look up "receiver step" on Ebay & you will find tons of them.
Could be great to use as a front bumper too. |
09-29-2010, 03:28 PM | #5 |
Not Yet Wild
Join Date: Jan 2010
Location: Bako, CA.
Posts: 38
|
Re: Rear Deck for a 01 PDS
Thanks for the ideas guys, I like the 2" reciever, that way i can take it off if i need to.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
CLUB CAR (GAS) REAR AXLE swap.....Are the gas and electric rear axles interchangeable | Gas Club Car | |||
Wanted: Rear seat w/fold down deck, for 2000,txt. | Golf Carts and Parts | |||
Rear deck extension XRT 850 | Gas Club Car | |||
Questions Re;Installing a radio/deck | Gas Yamaha | |||
El cheapo rear deck | Design Center |