|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-23-2008, 08:03 AM | #1 |
Gone Wild
Join Date: Jan 2007
Posts: 207
|
Gas Guy on Electric F/R Switch ?
Ok I was nominated to work on a 97 36volt non - dcs cart. Some idiot had gotten ahold of this cart, and the only wires hooked up right were the ones from batt. to batt. . Luckily they removed the wire from B+ to the solenoid. I have gotten all of it rewired thanks the diagrahms on here. The solenoid is functioning, controller seems to be working. No to the forward reverse switch. Should I have power at all 4 studs all the time when pedal is engaged? Any breakdowns on it and the motor would help. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-24-2008, 03:23 PM | #2 |
Gone Wild
Join Date: Jan 2007
Posts: 207
|
Re: Gas Guy on Electric F/R Switch ?
Come on guys, be of some help here!
|
03-24-2008, 03:49 PM | #3 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Gas Guy on Electric F/R Switch ?
Is the wire locations what you need
|
03-24-2008, 06:40 PM | #4 |
Gone Wild
Join Date: Jan 2007
Posts: 207
|
Re: Gas Guy on Electric F/R Switch ?
Well I need to tell if it is functioning. I know controller, solenoid and batts., are functioning. Just not sure of foward/reverse switch or motor. I know that I have 36 volts presnt at all 4 terminals at all times with pedal down.
|
03-24-2008, 06:59 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: Gas Guy on Electric F/R Switch ?
Uber, I don't have a controller cart but, looking at ruredy's diagram either S1 or S2 should have power not both as one must be forward and the other reverse!
Do you have a diagram for your cart? Sounds like the prob is in the F/R switch. |
03-24-2008, 07:50 PM | #6 |
Gone Wild
Join Date: Jan 2007
Posts: 207
|
Re: Gas Guy on Electric F/R Switch ?
I just used one off of here for a non dcs cart
|
03-24-2008, 08:28 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: Gas Guy on Electric F/R Switch ?
If you can link me to it I can see what you are working with. Do you see that you can't have two hots to the motor at the same time time ? This has to be your problem, logically speaking..
|
03-25-2008, 05:28 AM | #8 |
Gone Wild
Join Date: Jan 2007
Posts: 207
|
Re: Gas Guy on Electric F/R Switch ?
I know that. I was an electrician for yrs, but dont know anything about electric carts.
|
03-25-2008, 06:56 AM | #9 |
Not Yet Wild
Join Date: Mar 2008
Location: south ms,
Posts: 22
|
Re: Gas Guy on Electric F/R Switch ?
http://www.ransomes-jacobsen.biz/spe...%20English.pdf
start on p 45 section e follow trouble shootin steps make sure resistor is on solenoid or you will get crazy readins |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Reed Switch Bypass | Electric EZGO | |||
Brake light switch | Gas Yamaha | |||
micro switch | Electric EZGO | |||
its switch | Electric EZGO | |||
F/R switch looks a little weathered! | Electric Club Car |