95 ezgo

aggiebrad · 04-06-2008, 11:55 AM

hello everyone. kinda new to this, so bare with me. i have a 95 ezgo medalist, and i have lifted it and put a custom painted body on it. i had lights put in the body, but i'm not sure how to wire them. don't want to burn anything up. its a 36 volt electric system. any help would be appreciated.

scottyb · 04-06-2008, 12:03 PM

Each light is going to get a + and a - wire to it .....because an electric cart does not use the body ground as a gas vehicle can....Where is your souce of 12 volt power? Do you have a voltage reducer?

aggiebrad · 04-06-2008, 12:35 PM

no i dont have a voltage reducer. i thought i might need one, wasn't for sure though.

aggiebrad · 04-06-2008, 01:25 PM

do you know where i can get one for a good price?

greengobblin · 04-06-2008, 02:12 PM

you can just use 2 of the batteries that are already in your cart to get the 12 volts you need

aggiebrad · 04-06-2008, 02:25 PM

how do you go about doing that?

greengobblin · 04-06-2008, 02:35 PM

the batts are 6v each so 2 of them are 12v,they are in a series circuit. start from the positve (this will be the + conection for your lights) on one batt and you will see the batt cable leaving the negative going to the positive on the second batt, the negative on the second battery will be the - connection for you lights.

aggiebrad · 04-06-2008, 09:59 PM

thanks for your help

04-06-2008, 11:55 AM	#1
aggiebrad Not Yet Wild Join Date: Apr 2008 Posts: 6	95 ezgo hello everyone. kinda new to this, so bare with me. i have a 95 ezgo medalist, and i have lifted it and put a custom painted body on it. i had lights put in the body, but i'm not sure how to wire them. don't want to burn anything up. its a 36 volt electric system. any help would be appreciated.
aggiebrad Not Yet Wild Join Date: Apr 2008 Posts: 6

04-06-2008, 12:03 PM	#2
scottyb lug nutz Join Date: Dec 2007 Location: So Cal Posts: 4,979	Re: 95 ezgo Each light is going to get a + and a - wire to it .....because an electric cart does not use the body ground as a gas vehicle can....Where is your souce of 12 volt power? Do you have a voltage reducer?

04-06-2008, 12:35 PM	#3
aggiebrad Not Yet Wild Join Date: Apr 2008 Posts: 6	Re: 95 ezgo no i dont have a voltage reducer. i thought i might need one, wasn't for sure though.
aggiebrad Not Yet Wild Join Date: Apr 2008 Posts: 6

04-06-2008, 01:25 PM	#4
aggiebrad Not Yet Wild Join Date: Apr 2008 Posts: 6	Re: 95 ezgo do you know where i can get one for a good price?
aggiebrad Not Yet Wild Join Date: Apr 2008 Posts: 6

04-06-2008, 02:12 PM	#5
greengobblin Not Yet Wild Join Date: Dec 2007 Location: wrens ga Posts: 73	Re: 95 ezgo you can just use 2 of the batteries that are already in your cart to get the 12 volts you need

04-06-2008, 02:25 PM	#6
aggiebrad Not Yet Wild Join Date: Apr 2008 Posts: 6	Re: 95 ezgo how do you go about doing that?
aggiebrad Not Yet Wild Join Date: Apr 2008 Posts: 6

04-06-2008, 02:35 PM	#7
greengobblin Not Yet Wild Join Date: Dec 2007 Location: wrens ga Posts: 73	Re: 95 ezgo the batts are 6v each so 2 of them are 12v,they are in a series circuit. start from the positve (this will be the + conection for your lights) on one batt and you will see the batt cable leaving the negative going to the positive on the second batt, the negative on the second battery will be the - connection for you lights.

04-06-2008, 09:59 PM	#8
aggiebrad Not Yet Wild Join Date: Apr 2008 Posts: 6	Re: 95 ezgo thanks for your help
aggiebrad Not Yet Wild Join Date: Apr 2008 Posts: 6

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode