|
|||||||
| Notices |
| Electric EZGO Electric EZGO Marathon, Medalist, TXT and RXV. |
|
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
#1 |
|
Not Yet Wild
Join Date: Apr 2008
Posts: 2
|
I have a model h199 with ser.#1194268 , put new trojans in but cart has always hesitated...now you have to mash pedal several times and you here clicking inside controller box finally goes for awhile then you stop and you have go through the samething again to get it going...need help kids are on me .....thanks C Top
![]() |
|
|
|
|
|
|
|
|
#2 |
|
Gone Wild
Join Date: Jan 2008
Posts: 155
|
The clicking is the solenoid... or a short-circuit... Check for heat, loose connections...
SOLENOID... I'd put money on it... (but not that much...) Someone else will post with an answer too... GOOD LUCK!!! |
|
|
|
|
|
#3 |
|
Not Yet Wild
Join Date: Apr 2008
Posts: 2
|
Thanks Moto I'll try that and see what happens..
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| clicking 83 CC does not move | Electric Club Car | |||
| EZ Go Workhorse will not move | Gas EZGO | |||
| 93 36V cart wont move | Electric Club Car | |||
| Taylor Dunn utility cart won't move | Electric golf carts | |||
| G9 motor mounts, should they move this much? | Gas Yamaha | |||