97 EZGO not running due to high voltage from surface charge.

philofab · 03-11-2011, 04:59 PM

I'll probably get flamed for this again but here goes.

Got a 97 Ezgo golf cart with brand new U.S. 6v batteries, cables, and everything is in top notch order. If you fully charge it with the powerwise charger it will not run for a few minutes after you unplug it due to the surface charge voltage being too high. I assume this is a design flaw. Any fixes or has anyone experienced this before?

I could install an Alltrax controller but that's kinda a expensive fix for such a minor problem.

*** Edit, I should include that it is a Non-PDS cart with a 1206 ezgo/curtis controller.

03-11-2011, 04:59 PM	#1
philofab Not Yet Wild Join Date: Jun 2009 Posts: 24	97 EZGO not running due to high voltage from surface charge. I'll probably get flamed for this again but here goes. Got a 97 Ezgo golf cart with brand new U.S. 6v batteries, cables, and everything is in top notch order. If you fully charge it with the powerwise charger it will not run for a few minutes after you unplug it due to the surface charge voltage being too high. I assume this is a design flaw. Any fixes or has anyone experienced this before? I could install an Alltrax controller but that's kinda a expensive fix for such a minor problem. *** Edit, I should include that it is a Non-PDS cart with a 1206 ezgo/curtis controller.
philofab Not Yet Wild Join Date: Jun 2009 Posts: 24

Similar Threads
Thread	Forum
Voltage Rising on batteries while running	Extreme DC!
charger wont charge at high amps anymore	Electric EZGO
Pack voltage high while charging	Columbia ParCar
02 PDS dies/no voltage at the charge meter	Electric EZGO
High voltage contactor	Extreme DC!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum