04-12-2011, 06:31 PM | #1 |
Not Yet Wild
Join Date: Nov 2010
Location: Southeast Tennessee
Posts: 21
|
volt meter
I purchased a volt meter from Datel Meters and I'm trying to find a place to mount it on my 2006 ezgo. Any suggestions?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-12-2011, 07:43 PM | #2 |
Getting Wild
Join Date: Mar 2011
Location: Hurley, MS
Posts: 90
|
Re: volt meter
This is where I mounted mine on my 2008, I just made a dash out of some scrap stainless sheet metal.
|
04-12-2011, 07:51 PM | #3 |
Not Yet Wild
Join Date: May 2009
Location: SoCal
Posts: 31
|
Re: volt meter
Buy a key switch plate for a gas cart, tight fit but you can fit key, meter and fwd/rev switch on it.
|
04-12-2011, 07:58 PM | #4 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: volt meter
|
04-12-2011, 08:03 PM | #5 |
.....He, not ME
Join Date: Sep 2010
Location: Spring Hill, FL
Posts: 390
|
Re: volt meter
Similar to Tony's but I mounted mine directly into the dash beneath the caution label (after removing of course).....
|
04-12-2011, 11:13 PM | #6 |
Getting Wild
Join Date: Mar 2011
Location: Hurley, MS
Posts: 90
|
Re: volt meter
Nice Todo, I just used a roto-zip and made an access panel behind the sheet metal. It came in handy to squirt some silicone into the reverse buzzer for a muffler!
|
04-13-2011, 07:04 AM | #7 |
Not Yet Wild
Join Date: Mar 2011
Posts: 40
|
Re: volt meter
like everyone else, i mounted mine in the dash. i used a heat gun and removed the e-z-go warning label. used a roto-zip for meter hole and hole saw for toggle. i used heat shrink butt connectors, female disconnects, and terminal ends. install probably took 20 minutes or so.
|
04-13-2011, 08:33 AM | #8 |
Not Yet Wild
Join Date: Nov 2010
Location: Southeast Tennessee
Posts: 21
|
Re: volt meter
Thanks for your replys,, My next question, will the dash have to come off to mount it at the ezgo warning label spot? And another question, Does anyone make a cover plate for the radio compartment so the meter can be mounted there, I dont think I,ll be putting a radio in the cart?
Thanks again |
04-13-2011, 08:40 AM | #9 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,291
|
Re: volt meter
Yes, EZ-Go has a steel panel that fits that spot, It will have a hole and plastic plug for a 12v cigarette lighter. I do not know the part number, but I'm sure you could find it through ShopEZGo.com.
|
04-13-2011, 08:41 AM | #10 | |
.....He, not ME
Join Date: Sep 2010
Location: Spring Hill, FL
Posts: 390
|
Re: volt meter
Quote:
The Radio Compartment? You mean the ball holder which almost everyone here uses to install a radio......I've not come across any covers for that. Perhaps someone else will opine. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Volt reading when Isolating 2 6v batts, is seperate volt meter needed? | Electric EZGO | |||
volt meter | Electric EZGO | |||
digital volt ohm meter | Garage and Workshop | |||
OK! Got the Volt Meter - Now What? | Electric EZGO | |||
low price for a volt meter | Electric EZGO |