|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-14-2011, 12:32 AM | #1 |
Not Yet Wild
Join Date: Apr 2011
Location: Saraband Alabama
Posts: 45
|
New controller no go please help
03 series cart alltrax axe 500A push pettle solenoid clicks green light one blink then three red blinks then short brake then three more red blinks as long as hold pettle down
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-14-2011, 12:42 AM | #2 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: New controller no go please help
According to Altrax site 3 red blinks:
3 Red = HPD. Throttle hasn't gone to zero during this power on cycle. Check the floor mounted ITS switch under the mat. You need to adjust it so it reads 0 when your off the pedal. http://www.alltraxinc.com/files/Doc1...E-Mini-Man.pdf |
04-14-2011, 12:55 AM | #3 |
Not Yet Wild
Join Date: Apr 2011
Location: Saraband Alabama
Posts: 45
|
Re: New controller no go please help
How do you tell if it's on 0. How do you adjust it? Thanks
|
04-14-2011, 01:08 AM | #4 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: New controller no go please help
Pull the floor board up and on driver side there is a box with 4 screws. Take the cover off and there is a micro switch and a plunger inside the box. The plunger is set in place with a set screw. The plunger is threaded onto a rod. Loosen it and when the pedal is at rest have just a good gap between the end of plunger and the ITS.
|
04-14-2011, 06:35 AM | #5 |
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: New controller no go please help
i think scotty mentioned a 7/32 gap.
|
04-14-2011, 08:03 AM | #6 |
.....He, not ME
Join Date: Sep 2010
Location: Spring Hill, FL
Posts: 390
|
Re: New controller no go please help
ITS adjust procedure....
|
04-14-2011, 08:10 AM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: New controller no go please help
This fault code will come up if the you don't have enough gap as mentioned.
With the cart securely up on blocks, put a jumper wire from the 36v positive to terminal #1 on the controller. The green light should be solid. If the cart runs like this the ITS adjustment is your problem. |
04-14-2011, 08:17 AM | #8 |
.....He, not ME
Join Date: Sep 2010
Location: Spring Hill, FL
Posts: 390
|
Re: New controller no go please help
Hmm, go figure...The adjustment procedure I posted never mentions the micro switch....
Maybe it's elsewhere in the manual? edit- there's a procedure and some drawings starting at section F-20 in the EZ-GO Maintenace manual....... Last edited by todo_brane_ded; 04-14-2011 at 08:29 AM.. Reason: ez-go manual |
04-14-2011, 09:38 AM | #9 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: New controller no go please help
I remembered the gap being pretty small. 17/64". But didn't want to guess at it last night. Hope this helps you out. LUK what you find.
|
04-14-2011, 01:05 PM | #10 |
Gone Wild
Join Date: Nov 2009
Location: Pennsylvania
Posts: 167
|
Re: New controller no go please help
One other thing to double check is the throttle input setting. Make sure the controller is set for EZGO ITS. The 1 blink green at power up is for 0-5k input. You want 4 blinks green at power up.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
a DC motor controller ( electronic speed controller) | Golf Carts and Parts | |||
Trade 400 amp 36v Curtis controller for 500 amp or higher 48v controller | Golf Carts and Parts | |||
controller | Electric golf carts | |||
controller | Golf Carts and Parts | |||
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO |