|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-15-2011, 10:06 AM
|
#1 |
|
Not Yet Wild
Join Date: May 2010
Location: GA
Posts: 29
|
94 series cart no response
I have new batteries new 500amp alltrax controller new heavy duty solenoid light to controller comes on when pressing the pedal but does not go. I can jump wire from neg. to black on controller an it goes... Is it the F&R ????
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-15-2011, 05:35 PM
|
#2 |
|
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: 94 series cart no response
Have you done any rewiring of it? It is getting juice to the controller. It may have the F/R cam off. The bus bars have to be a certain way or the power can't move forward in the system.
 |
|
|
|
|
04-15-2011, 07:25 PM
|
#3 |
|
Not Yet Wild
Join Date: May 2010
Location: GA
Posts: 29
|
Re: 94 series cart no response
No rewiring... The cart was running with old ezgo control an just quit so replaced with new control and solenoid F&R seems to be fine thinking about picking up new H/D anyways...
|
|
|
|
|
04-15-2011, 08:03 PM
|
#4 | |
|
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: 94 series cart no response
Quote:
Can you give a little more detail on this. It's almost as you left a cable off.  |
|
|
|
|
|
04-15-2011, 10:59 PM
|
#5 |
|
Not Yet Wild
Join Date: May 2010
Location: GA
Posts: 29
|
Re: 94 series cart no response
Sorry.... neg bat post to Number 2 on alltrax controller I have forward or reverse whatever I choose...not trying to be a smart one!!!
Last edited by craneman; 04-15-2011 at 11:00 PM.. Reason: No cables left off |
|
|
|
|
04-15-2011, 11:31 PM
|
#6 |
|
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: 94 series cart no response
OK,
when you say #2 you mean the little spade connection on the controller. I'm not really sure I'm following you right. Can you post some pictures of the wires you are jumping? |
|
|
|
|
04-25-2011, 10:14 AM
|
#7 |
|
Not Yet Wild
Join Date: May 2010
Location: GA
Posts: 29
|
Re: 94 series cart no response
Got it figured out it was a bad connection where the throttle wires plug up... Thanks for the heip
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 94 series cart promblems | Electric EZGO | |||
| Ez go series cart diagram | Electric EZGO | |||
| Help (again) with 1999 series cart | Electric EZGO | |||
| Upgrading cart from EZGO Series cart | Electric EZGO | |||
| 04 series cart | Electric EZGO | |||
Linear Mode
