1996 EZGO electrical

hoggjaww · 05-08-2008, 08:07 PM

I was driving my EZGO today killing ant piles and stuff, (slow) then I started smelling wire insulation burning, I put it back on the porch, pulled off the seat and all 3 wires underneath the run/tow cover were hot, the one jumper from the (Ford looking) solenoid to the above landing was **** HOT. Can you help me out here fellas? Do I need to chase every wire down on this contraption, or what? I wasn't loading the cart at all, (towing logs etc.) just slow speed ant killing.

Harry

nothinbutalittle · 05-08-2008, 10:24 PM

I would check all connections and wires if I were you.I had a problem similar to what you had when I first got my 95 EZGO.Whoever wired mine before I bought it didn't know much about wiring.It had 4 gauge wire mixed with smaller gauge wire.I had some loose connections also.I first noticed mine getting hot when I was creeping around slow.It's better to take the time to check everything than to have an electrical meltdown,and have to push it to the porch!Good Luck!

hoggjaww · 05-09-2008, 09:09 AM

Yes, I will order a 4 ga. wire kit, change them all out and be done with it.

Thanks

rusty · 05-09-2008, 09:57 PM

Welcome "hoggjaww".............

Don't forget to disconnect the main Positive and main Negative before working on the electrical system and reconnect them last.

05-08-2008, 08:07 PM	#1
hoggjaww Not Yet Wild Join Date: Apr 2008 Location: Westlake La. Posts: 9	1996 EZGO electrical I was driving my EZGO today killing ant piles and stuff, (slow) then I started smelling wire insulation burning, I put it back on the porch, pulled off the seat and all 3 wires underneath the run/tow cover were hot, the one jumper from the (Ford looking) solenoid to the above landing was **** HOT. Can you help me out here fellas? Do I need to chase every wire down on this contraption, or what? I wasn't loading the cart at all, (towing logs etc.) just slow speed ant killing. Harry Last edited by hoggjaww; 05-09-2008 at 08:57 AM. Reason: wording

05-08-2008, 10:24 PM	#2
nothinbutalittle Not Yet Wild Join Date: May 2008 Posts: 7	Re: 1996 EZGO electrical I would check all connections and wires if I were you.I had a problem similar to what you had when I first got my 95 EZGO.Whoever wired mine before I bought it didn't know much about wiring.It had 4 gauge wire mixed with smaller gauge wire.I had some loose connections also.I first noticed mine getting hot when I was creeping around slow.It's better to take the time to check everything than to have an electrical meltdown,and have to push it to the porch!Good Luck!

05-09-2008, 09:09 AM	#3
hoggjaww Not Yet Wild Join Date: Apr 2008 Location: Westlake La. Posts: 9	Re: 1996 EZGO electrical Yes, I will order a 4 ga. wire kit, change them all out and be done with it. Thanks

05-09-2008, 09:57 PM	#4
rusty The Welcome Guy Join Date: Jan 2007 Location: Wichita Falls Texas - My Rides 1996 E-Z-GO and 2002 Club Car IQ and 2003 Club Car IQ Posts: 3,045	Re: 1996 EZGO electrical Welcome "hoggjaww"............. Don't forget to disconnect the main Positive and main Negative before working on the electrical system and reconnect them last.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Adding lights to 1996 EZGO DCS	Electric EZGO
Electrical black out?	Gas Club Car
Electrical Problem	Electric Club Car
HELP, electrical problem EZGO	Electric EZGO
1996 Electric Electrical Problem	Electric EZGO