Looking for wiring diagram to ignition switch

Pull my finger

Hello all, I have a 2000 EZ-GO PDS and need a wiring diagram showing the ignition switch, and where those 2 wires go to.

Someone who owned this cart before me cut and butchered those wires, i'm just trying to wire it correctly. I have searched for hours with no results, thanks guys!

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

madoc1

at the top of this forum find the stickies. the last one down has your manual. it is #28646.

and welcome to bgw.

scottyb

Welcome to BGW Oside

Attached Images

Ezgo PDS diagram.JPG (117.0 KB, 143 views)

Pull my finger

Thanks for the welcome and diagram! Don't know how I missed that, thought I looked through all of them. Must be age. Anyway, my cart has no reverse.... until I pull the headlight switch on.

It looks like someone wired the ground side of the headlights to the ignition switch. I guess next I need to see the diagram for the lighting circuit.

Pull my finger

Hey thanks to all for your help. The final diagnoses of this problem (No reverse unless headlights are on) is someone tried to power the headlights from the key switch and fried a circuit in the controller.

After removing the headlight wiring from the key switch, I ran a totally separate circuit for just the headlights from 2 batteries. Then disassembled the controller and found a burnt diode on the PCB that powers the white wire to the key switch.

Went to Radio Shack, bought a package of different diodes for $3, removed the fried diode and soldered in a new one and everything works fine now.

Thanks again, you guys are awesome!

clemson74

I have a 2007 ezgo St 4x4 2007 and i need to know where the wires hook up on the key switch i am not sure which color to which post on the key switch