Wiring Diagram Needed for 1996 Model (E1096)

mjc4502

Hello,

Have a EZGO cart that had a electrical malfunction. Had a small electrical fire around the Forward/Reverse switch under the seat.

Builder plate has E1096 stamped on it. Was told by someone that it was built in 1996.

I would like to find a copy of the wiring diagram for this model. I looked at some of the diagrams in this site but the models did not match.

Also, I diagram/photo of the forward/reverse switch and the components attached to it would be helpful too.

I still measured voltage across the main battery leads after pulling one jumper between two batteries. is there a capacitor somewhere in the circuit? I noticed other wires mounted to some of the other batteries, i removed them and still get about 20vdc across the two main power leads.

there was a component mounted to the F/R switch that was destroyed by fire. What would this component be? A reverse horn perhaps? Might have to replace both microswitches since they were exposed to high temperatures.

One of the cables going to the motor, marked "C" had burned away which i feel is what caused the fire. when this cable burned away, would it cause damage to the speed control?

the rest of the cables leading to the speed module and motor seem to be OK.

thanks for the help
Mike

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

rusty

Welcome Mike.............

Some of the diagrams cover several years...........

Sombody here will be able to help more than me..........