Newbie with a 91 Marathon Diagram!

ajwashere · 05-22-2008, 12:15 AM

Hello and thank all of you for a great site! I have found many great threads with tons of valuable information in this forum. But I am in need of some help. I cannot figure out what type of control system my 1991? EZGO marathon is. And were to find a wiring diagram or schematic. I see it has what looks like a solid state controller with a heavy duty relay/solonoid(see pic) next to it. Also, may sound dumb, but what is the electric push button on the brake pedal for? Ok I have included pictures so take a look. I purchased this bad boy for $200 without batteries. Yes, I know it looks bad in the pictures but its comming along. Any info would be greatly appreciated. Thanks in advance....AJWASHERE

P.S. I included a pic of the serial plate because I am not even 100% sure its a 1991 or a Marathon!

pggroves · 05-22-2008, 08:24 AM

Definitely a 91 Marathon controller cart. Push button on brake pedal may be for brake lights ??? Didn't see a pic of pedal or rear so just guessing.

Here is a schematic.

I'm very partial to the older Marathons. They are tanks!!!

Good luck with the new addiction!

roady89 · 05-22-2008, 10:29 AM

I wouldn't say that was a heavy duty solenoid. They look similar.

rusty · 05-22-2008, 12:23 PM

Welcome AJ..................

Button on the pedal? Does it have brake lights?

ajwashere · 05-22-2008, 10:10 PM

Wow guys! Thanks for the fast replys and good info! Im glad to hear the Marathons are tanks. And yes it did have taillights. So I guess its the brake light switch. As for the schematic, it is helpful but does not show the relay/solenoid wiring. And how about 12V accessories? Do you guys tap into two of the batteries or use one of those voltage reducers? I ask because I plan on adding two lights on the front and maybe a stereo. Most the reducers I have seen are 10A and two lights and a stereo will pull more than that I think. Thanks again to everyone for the info!...AJWASHERE

ajwashere · 05-23-2008, 12:09 AM

I dont know what happened to my response! Anyways, thanks a million guys. And yes it had taillights so that answers that. The diagram helps also but does not show the solenoid. As for the lights, the wiring could not have been factory as it was routed poorly and was low quality. I think I will get a voltage reducer and hook up lights, radio, ejection seat to that. Thanks again for everyones help and input...AJ

pggroves · 05-23-2008, 12:54 PM

Quote:

Originally Posted by ajwashere

I dont know what happened to my response! Anyways, thanks a million guys. And yes it had taillights so that answers that. The diagram helps also but does not show the solenoid. As for the lights, the wiring could not have been factory as it was routed poorly and was low quality. I think I will get a voltage reducer and hook up lights, radio, ejection seat to that. Thanks again for everyones help and input...AJ

Build pics will be a must.

rusty · 05-23-2008, 09:08 PM

..........And don't forget the Ejection Seat!!!! We all need that option from time to time. hee hee hee And........ one that a wife can't operate!!!!

ajwashere · 05-30-2008, 12:10 AM

I will post build pics soon. Just having a hell of a time finding the rear fender(mud gaurd) trim and u-bolts! LVS dropped the ball. Who do you guys use for Marathon parts?

Thanks...Aj

pggroves · 05-30-2008, 10:10 AM

Wherever you find them! Getting much more difficult especially on body parts.

05-22-2008, 08:24 AM	#2
pggroves steeplejack x Join Date: Jan 2007 Location: Republic of Texas Posts: 958	re: Newbie with a 91 Marathon Diagram! Definitely a 91 Marathon controller cart. Push button on brake pedal may be for brake lights ??? Didn't see a pic of pedal or rear so just guessing. Here is a schematic. I'm very partial to the older Marathons. They are tanks!!! Good luck with the new addiction!

05-22-2008, 10:29 AM	#3
roady89 Brkn it dwn BaRnEy StYlE Join Date: Jun 2007 Location: Kaufman, Texas Posts: 3,449	Re: Newbie with a 91 Marathon Diagram! I wouldn't say that was a heavy duty solenoid. They look similar.
	Golf Carts \| Lifted Golf Carts \| Electric Golf Carts Custom EZGO \| B&S V-Twin \| All Sports Long Travel Lift \| 8:1 Gears \| 22" Titan AT489's \| \| \| \| \| \| \|

05-22-2008, 12:23 PM	#4
rusty The Welcome Guy Join Date: Jan 2007 Location: Wichita Falls Texas - My Rides 1996 E-Z-GO and 2002 Club Car IQ and 2003 Club Car IQ Posts: 3,065	Re: Newbie with a 91 Marathon Diagram! Welcome AJ.................. Button on the pedal? Does it have brake lights?

05-22-2008, 10:10 PM	#5
ajwashere Not Yet Wild Join Date: May 2008 Posts: 14	Re: Newbie with a 91 Marathon Wow guys! Thanks for the fast replys and good info! Im glad to hear the Marathons are tanks. And yes it did have taillights. So I guess its the brake light switch. As for the schematic, it is helpful but does not show the relay/solenoid wiring. And how about 12V accessories? Do you guys tap into two of the batteries or use one of those voltage reducers? I ask because I plan on adding two lights on the front and maybe a stereo. Most the reducers I have seen are 10A and two lights and a stereo will pull more than that I think. Thanks again to everyone for the info!...AJWASHERE Last edited by ajwashere; 05-23-2008 at 08:40 AM. Reason: missing space
ajwashere Not Yet Wild Join Date: May 2008 Posts: 14

05-23-2008, 12:09 AM	#6
ajwashere Not Yet Wild Join Date: May 2008 Posts: 14	Re: Newbie with a 91 Marathon Diagram! I dont know what happened to my response! Anyways, thanks a million guys. And yes it had taillights so that answers that. The diagram helps also but does not show the solenoid. As for the lights, the wiring could not have been factory as it was routed poorly and was low quality. I think I will get a voltage reducer and hook up lights, radio, ejection seat to that. Thanks again for everyones help and input...AJ
ajwashere Not Yet Wild Join Date: May 2008 Posts: 14

05-23-2008, 09:08 PM	#8
rusty The Welcome Guy Join Date: Jan 2007 Location: Wichita Falls Texas - My Rides 1996 E-Z-GO and 2002 Club Car IQ and 2003 Club Car IQ Posts: 3,065	Re: Newbie with a 91 Marathon Diagram! ..........And don't forget the Ejection Seat!!!! We all need that option from time to time. hee hee hee And........ one that a wife can't operate!!!!

05-30-2008, 12:10 AM	#9
ajwashere Not Yet Wild Join Date: May 2008 Posts: 14	Re: Newbie with a 91 Marathon Diagram! I will post build pics soon. Just having a hell of a time finding the rear fender(mud gaurd) trim and u-bolts! LVS dropped the ball. Who do you guys use for Marathon parts? Thanks...Aj
ajwashere Not Yet Wild Join Date: May 2008 Posts: 14

05-30-2008, 10:10 AM	#10
pggroves steeplejack x Join Date: Jan 2007 Location: Republic of Texas Posts: 958	Re: Newbie with a 91 Marathon Diagram! Wherever you find them! Getting much more difficult especially on body parts.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
wiring diagram	Electric Yamaha
86 Marathon Gas Wiring Diagram	Gas EZGO
another newbie with 94 ezgo marathon	Electric EZGO
diagram G8	Gas Yamaha