|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-17-2011, 12:50 PM | #1 |
Not Yet Wild
Join Date: Jul 2011
Location: Michigan
Posts: 7
|
96 EZ GO Electric Motor Works but no go
Hello All,
I am new to this, but I have a 96 EZ Go TXT that when I push the pedal I can hear the electric motor run but it goes no where has anyone ran into this issue and if so what was your fix? Troy |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-17-2011, 01:08 PM | #2 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 96 EZ GO Electric Motor Works but no go
Welcome to BGW
sounds like you have a striped brake hub, you need to be able to see the castle nut in the middle of your rear wheel that holds the brake hub on , see if it is spinning when you push the go pedal, BLOCK up the front tires so the cart can't move on you for safety, put the rear wheels up on a jack off the ground, and or jack stands |
07-17-2011, 01:20 PM | #3 |
Not Yet Wild
Join Date: Jul 2011
Location: Michigan
Posts: 7
|
Re: 96 EZ GO Electric Motor Works but no go
There is no movement of the castle nut when power applied, where do I go from here?
|
07-17-2011, 01:23 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 96 EZ GO Electric Motor Works but no go
Since the cart won't move .... Check the passenger side first. Just remove any hub cap & watch the axle nut while somebody eases the throttle on. If the nut spins and not the wheel... shes' stripped... NOTE the axle nut MUST be re-torqued to 100-140 ft pounds when re installed.
|
07-17-2011, 01:47 PM | #5 |
Not Yet Wild
Join Date: Jul 2011
Location: Michigan
Posts: 7
|
Re: 96 EZ GO Electric Motor Works but no go
Got no movement out of either one, this must be bad
|
07-17-2011, 01:50 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 96 EZ GO Electric Motor Works but no go
|
07-17-2011, 02:09 PM | #7 |
Not Yet Wild
Join Date: Jul 2011
Location: Michigan
Posts: 7
|
Re: 96 EZ GO Electric Motor Works but no go
Yep, motor hums when power applied but no movement out of those castle nuts
|
07-17-2011, 02:13 PM | #8 |
Not Yet Wild
Join Date: Jul 2011
Location: Michigan
Posts: 7
|
Re: 96 EZ GO Electric Motor Works but no go
Not sure of the wisdom I may have displayed but I removed the pan at the bottom of the transmission (if that is what it is called) had my son push the pedal real easy, everything seem to be moving as designed but nothing is moving outboard of the gear box
|
07-17-2011, 02:18 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 96 EZ GO Electric Motor Works but no go
Okay ~ One of the axle shafts may be broken? It is an open differential... if one wheel spins the other does not move.
Gears are moving and axle nuts are not? The spider gear cluster is moving? I think I would start by pulling the passenger side axle. |
07-17-2011, 02:22 PM | #10 |
Not Yet Wild
Join Date: Jul 2011
Location: Michigan
Posts: 7
|
Re: 96 EZ GO Electric Motor Works but no go
I was afraid that may be the case, guess I will go get dirty for a while, Thanks for all your help Scotty and RIB, I really appreciate it
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Sometimes it works and sometimes it doesn't???? | Electric Club Car | |||
How to get Electric motor off? | Electric EZGO | |||
My electric motor died i need help with what to do with installing a gas motor !!!! | Electric Club Car | |||
Help to see if motor works!! | Electric Club Car | |||
It Works! | Electric EZGO |