|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-26-2011, 01:12 PM | #1 |
Not Yet Wild
Join Date: Sep 2011
Location: Palm Bay, FL
Posts: 32
|
Installing car LED fog lamps
I have a set of LED car fog lamps that I plan to install on my TXT. There is a 5 amp fuse that comes inline with it. Will I have any problems with this? I understand these batteries are higher ampreage and I am not sure what would happen. Will I also have any ground issues as the I hear the frames are not grounded. Thanks for any insight.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-26-2011, 03:25 PM | #2 |
Gone Wild
Join Date: Dec 2010
Location: Jax FL
Posts: 598
|
Re: Installing car LED fog lamps
you shouldn't have any issues other than making sure the positive goes to positive and the negative goes to the second in-line battery negative.
LED's are polarity sensitive if it doesn't work reverse the wires. |
09-26-2011, 03:26 PM | #3 |
Not Yet Wild
Join Date: Sep 2011
Location: Palm Bay, FL
Posts: 32
|
Re: Installing car LED fog lamps
Thanks!!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Installing Gas Tank 99 EZ-GO | Gas EZGO | |||
installing a tach on my g-16 and need a little help. | Gas Yamaha | |||
installing lift kit | Gas Club Car | |||
Installing a DCX 400 | Electric EZGO | |||
Installing new controller | Electric EZGO |