98 dcs rear end grind noise

sennf1 · 10-15-2011, 08:21 PM

I have a 98 dcs making noise when i let off the pedal. The noise is quite loud. If you used a screwdriver on bicycle spokes while riding. I jacked it up and it made noise when i pushed the pedal. the motor was jerking a little. I pulled the motor and noticed the input shaft splines were torn up a bit. I was going to order a new input shaft. When I look up the motor coupling to order on, it has a date of 1988-1996. I have a 98 with a electric vehicle power systems motor. any ideas on what coupling i should order? I am going to check the bearing on the back of the motor.

10-15-2011, 08:21 PM	#1
sennf1 Not Yet Wild Join Date: Oct 2011 Posts: 1	98 dcs rear end grind noise I have a 98 dcs making noise when i let off the pedal. The noise is quite loud. If you used a screwdriver on bicycle spokes while riding. I jacked it up and it made noise when i pushed the pedal. the motor was jerking a little. I pulled the motor and noticed the input shaft splines were torn up a bit. I was going to order a new input shaft. When I look up the motor coupling to order on, it has a date of 1988-1996. I have a 98 with a electric vehicle power systems motor. any ideas on what coupling i should order? I am going to check the bearing on the back of the motor.
sennf1 Not Yet Wild Join Date: Oct 2011 Posts: 1

Similar Threads
Thread	Forum
ezgo dcs grind	Electric EZGO
rear end noise	Gas EZGO
Rear end noise	Electric Club Car
g14 rear end noise?	Gas Yamaha
Rear End Noise	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum