|
|||||||
| Notices | ||
|
| Electric EZGO Electric EZGO Marathon, Medalist, TXT and RXV. |
|
  |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|||||||
| Notices | ||
|
| Electric EZGO Electric EZGO Marathon, Medalist, TXT and RXV. |
|
|
| |
|
|
Thread Tools | Search this Thread | Display Modes |
06-12-2008, 08:11 AM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2008
Location: SC
Posts: 4
|
94 EZGO top
Anybody tried repairing plastic top cracks with anything other than silicone that works?
|
|
|
|
|
|
|
06-12-2008, 08:42 AM
|
#2 |
|
lug nutz
Join Date: Dec 2007
Location: So Cal
Posts: 4,981
 |
Re: 94 EZGO top
No but I did have success with silicone?
 |
|
|
|
|
06-12-2008, 11:36 AM
|
#3 | |
|
Gone Wild
Join Date: Mar 2008
Location: United States of America
Posts: 201
|
Re: 94 EZGO top
Quote:
 Just don't "goosh" big ol' globs on there ...... Drill a small hole a little bigger than a toothpick at both ends of the crack ....... so the crack itself has a definite end. Then drill a couple more small holes along the crack. Squeeze out a nice fine bead onto the breach (crack) making sure it gets down into the crack itself, then smooth off the excess with a spitted finger. Don't wipe all of the Liquid Nails off, just the rough edges. Finally, If you DO mind the baby-poop brown color  ...... Epoxy appliance paint (from Home depot) works wonders. |
|
|
|
|
|
| Tags |
| ezgo, plastic repair, plastic top |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
