|
11-17-2011, 12:48 PM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2011
Posts: 66
|
new motor
i wanted to make my cart faster.... i guess i will get a new motor...am i going to need a new controller and solonoid...i dont no too much about it
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-17-2011, 02:07 PM
|
#2 |
|
Gone Wild
Join Date: Feb 2011
Posts: 341
|
Re: new motor
4 gauge or larger wiring is the first thing you need. You will also need an HD F/R if it is a series cart. Then get a controller and solenoid. Depending on how big the controller is, then finally you get the motor. You can get everything from scotty b but the motor, which you can get your old one rebuilt by plum quick.
|
|
|
|
|
11-17-2011, 09:18 PM
|
#3 |
|
Not Yet Wild
Join Date: Oct 2011
Posts: 66
|
Re: new motor
well i just want it like a little faster...and when i stop it has slow acceleration...but its not too bad..any ideas
|
|
|
|
|
11-18-2011, 01:08 PM
|
#4 |
|
Gone Wild
Join Date: Feb 2011
Posts: 341
|
Re: new motor
A new motor wont do anything without an upgraded electrical system and controller. It's better to have an upgraded controller and stock motor.
|
|
|
|
|
11-18-2011, 02:16 PM
|
#5 |
|
Not Yet Wild
Join Date: Oct 2011
Posts: 66
|
Re: new motor
okay could you find a controller for me? im not really looking for
|
|
|
|
|
11-18-2011, 02:46 PM
|
#6 |
|
Gone Wild
Join Date: Feb 2011
Posts: 341
|
Re: new motor
http://www.cartsunlimited.net/Custom_Options.html
Also buy an HD F/R and 4 gauge cables, this guy sells all off it. I would get the 400 amp alltrax or the 500 amp FSIP. When you replace you're batteries you might just want to get 6 8 volt batteries and convert the cart to run on 48 volts. The only thing additional you will need is a charger. |
|
|
|
|
11-18-2011, 03:21 PM
|
#7 |
|
......................
 Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: new motor
Hey juleshockey6 don't you have a marathon? is it a controller cart now?? or a resistor cart
|
|
|
|
|
11-18-2011, 03:34 PM
|
#8 |
|
Not Yet Wild
Join Date: Oct 2011
Posts: 66
|
Re: new motor
its a 87 marathon....im quite sure....
|
|
|
|
|
11-18-2011, 03:42 PM
|
#9 |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: new motor
OK, but your cart is a resistor coil cart right?? you don't have a controller in your cart now, you have to change a few more things than just a controller, and
it is a good time to go 48v, here read this, this is what you need to do  http://www.buggiesgonewild.com/desig...rsion-kit.html |
|
|
|
|
11-18-2011, 03:44 PM
|
#10 |
|
Gone Wild
Join Date: Feb 2011
Posts: 341
|
Re: new motor
How did I forget about that?
 This is his cart, and sure enough it's a resistor. |
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1978 Harley Motor swap to a CRF 450cc motor. pics inside.. gearing help???/ | Gas Harley Davidson | |||
| Replacing original motor with a GE motor??? | Electric Club Car | |||
| My electric motor died i need help with what to do with installing a gas motor !!!! | Electric Club Car | |||
| Motor controller and Motor match? | Electric Club Car | |||
| Converting from G1 motor to V Twin Motor | Gas Yamaha | |||
Linear Mode
