|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-07-2011, 11:56 AM | #1 |
Not Yet Wild
Join Date: Nov 2011
Posts: 43
|
Need 5ft Control Cable to move Alltax contoller
I need a 5ft extension for the control cables that connect the Alltrax DCX600 controller to the PDS wires (not battery cables)(throttle,horn,reverse, etc). Anyone sell these or know where I can buy them?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-07-2011, 12:55 PM | #2 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Need 5ft Control Cable to move Alltax contoller
Do you mean a extension to plug into what you have now are another cable all together?
If you need to extended it just cut it and use butt connectors and make it as long as you need it. http://www.shopezgo.com/products/Wir...h-for-PDS.html This is the harness I bought for the 96 E-Z-GO to convert it over to a PDS cart. |
12-07-2011, 02:08 PM | #3 |
Not Yet Wild
Join Date: Nov 2011
Posts: 43
|
Re: Need 5ft Control Cable to move Alltax contoller
Thanks
It seems I will have to make my own cable. |
12-08-2011, 10:30 AM | #5 | |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Need 5ft Control Cable to move Alltax contoller
Quote:
I know they make a connector for it because my AC conversion has it on it to mate to the new controller. I would like to know if you can findout for sure. |
|
12-08-2011, 03:13 PM | #6 |
Gone Wild
Join Date: Oct 2010
Location: Panama City, FL
Posts: 1,408
|
Re: Need 5ft Control Cable to move Alltax contoller
andy, are there any numbers printed on it? can you take a photo? the drawing shows the model number embossed on the end of the latch. not sure if this is where it would actually be found or not.....
if there are no numbers printed on it and if you have a set of calipers, you can compare the drawing measurements to those of your connector. molex is often cloned. proprietary connectors would add considerable expense to the cost of manufacturing. im 99% sure this is a off-the-shelf connector. its just a matter of identifying it. -sj |
12-08-2011, 03:39 PM | #7 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Need 5ft Control Cable to move Alltax contoller
I wished I could tell you but the cart is at our beach house 5 hrs away.
Oh wait I can look at the other one. I'll get back to you. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Bad Contoller? | Electric Yamaha | |||
Ezgo dcs contoller | Electric EZGO | |||
Contoller Questions | Electric EZGO | |||
IQ with Alltax 500 amp controller? | Electric Club Car | |||
D&D Motors Contoller | Electric Club Car |