Bent Frame

eznogo · 06-20-2008, 03:31 PM

I HAVE A 94 EZ-GO MARATHON,YOU GUYS HELPED ME WORK OUT ALL THE OTHER PROBLEMS SO I FIGURED I WOULD TRY MY LUCK AGAIN!ANYONE HAD A BENT FRAME AND REPAIRED?HOW? ITS BENT RIGHT IN FRONT THE BATTERIES FROM WHAT I CAN SEE,ON BOTH SIDES!THANKS

caddymankc · 06-20-2008, 10:54 PM

So how high of a jump did you go over?lol I have no clue how to straighten the frame,maybe 2 big pieces of metal and a big vice?

eznogo · 06-21-2008, 01:58 PM

Did Not Jump Anything Yet!lol I Ghot The Cart From A Friend And It Was Bent Already,i'm Trying To Fix It!!

bhfear · 06-21-2008, 06:55 PM

heat it up and a big hammer,

craig tn · 06-21-2008, 07:26 PM

Talk to a local body shop and have them put it on there frame machine and pull it. I have had several pulled with no problems. i would try to stay away from heating.

JFritzsd · 06-04-2009, 01:06 PM

Anyone have any luck with using a couple of chains and a come along to control the pull. Primitive Pet type stuff, but if it works, go with it.

TAJs · 06-18-2009, 09:58 AM

I have put new frame rails in EZ Go in the past. You need to get 1x3 tube and I cut the bad out from the ends under the dash and where it comes under the floor. There are plenty of places to weld it back in.

06-20-2008, 03:31 PM	#1
eznogo Not Yet Wild Join Date: Jun 2008 Location: louisiana Posts: 30	Bent Frame I HAVE A 94 EZ-GO MARATHON,YOU GUYS HELPED ME WORK OUT ALL THE OTHER PROBLEMS SO I FIGURED I WOULD TRY MY LUCK AGAIN!ANYONE HAD A BENT FRAME AND REPAIRED?HOW? ITS BENT RIGHT IN FRONT THE BATTERIES FROM WHAT I CAN SEE,ON BOTH SIDES!THANKS

06-20-2008, 10:54 PM	#2
caddymankc WILD Join Date: May 2007 Location: In my 64 chrysler,pa Posts: 1,202	Re: Bent Frame So how high of a jump did you go over?lol I have no clue how to straighten the frame,maybe 2 big pieces of metal and a big vice?

06-21-2008, 01:58 PM	#3
eznogo Not Yet Wild Join Date: Jun 2008 Location: louisiana Posts: 30	Re: Bent Frame Did Not Jump Anything Yet!lol I Ghot The Cart From A Friend And It Was Bent Already,i'm Trying To Fix It!!

06-21-2008, 06:55 PM	#4
bhfear EZ-GO-N Join Date: Dec 2007 Location: Geneseo, IL Posts: 492	Re: Bent Frame heat it up and a big hammer,

06-21-2008, 07:26 PM	#5
craig tn Gone Wild Join Date: Jan 2008 Location: Covington, TN Posts: 1,420	Re: Bent Frame Talk to a local body shop and have them put it on there frame machine and pull it. I have had several pulled with no problems. i would try to stay away from heating.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

06-04-2009, 01:06 PM	#6
JFritzsd Not Yet Wild Join Date: Feb 2009 Posts: 35	Re: Bent Frame Anyone have any luck with using a couple of chains and a come along to control the pull. Primitive Pet type stuff, but if it works, go with it.
JFritzsd Not Yet Wild Join Date: Feb 2009 Posts: 35

06-18-2009, 09:58 AM	#7
TAJs Not Yet Wild Join Date: May 2009 Posts: 1	Re: Bent Frame I have put new frame rails in EZ Go in the past. You need to get 1x3 tube and I cut the bad out from the ends under the dash and where it comes under the floor. There are plenty of places to weld it back in.
TAJs Not Yet Wild Join Date: May 2009 Posts: 1

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Yamaha G9 frame repair	Design Center
Wanted: Frame section	Golf Carts and Parts
Yammi frame	Golf Carts and Parts
Redesigned bed frame for Yamaha G2	Design Center
Painting the frame	Gas EZGO