|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-01-2012, 11:45 PM | #1 |
Not Yet Wild
Join Date: Jul 2010
Location: Winchester, KY 40391
Posts: 39
|
NEED Shocks 17548G1
Need Rear Shocks for my Western build its built on a ezgo marathon chassis
numbers on shocks are T0O13 17548G1 Made in Canada any help would be greatly appreciated. Heres a pic the spring on them look like they are transferable to a new shock |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-03-2012, 06:10 AM | #2 |
Not Yet Wild
Join Date: Jul 2010
Location: Winchester, KY 40391
Posts: 39
|
Re: NEED Shocks 17548G1
Any Ideas ?
|
01-03-2012, 08:07 AM | #3 |
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: NEED Shocks 17548G1
I looked and looked and can not find anything bud. So looks like we are on to out next and "ONLY" step.
Go to the provided Monroe link below: Monroe Shock Guide What you do from here, and I will help you or even do it for you if you would like, is first we need to figure out what ends you have. Look at the chart and decide what style shock you have first, Then, your are going to measure your compressed length and decompressed length. Remember, that on a golf cart shock, the measure their lengths from tip to tip, where as automotive applications measure from the base of the shock body, or the middle of the bolt eye. Once we get all of this information, we can go down through the chart and see what either matches up or comes very close Hope this helps Colton |
01-05-2012, 05:35 AM | #4 |
Not Yet Wild
Join Date: Jul 2010
Location: Winchester, KY 40391
Posts: 39
|
Re: NEED Shocks 17548G1
Hey Coltf1991 i appreicate your help at least i know i can get something i will take some pics and measurements and post them this weekend and i'll get your opinion on what i need again thanks for taking the time to help me.
|
01-05-2012, 01:56 PM | #5 |
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: NEED Shocks 17548G1
If you just give me all of your measurements, I will get you the Monroe part numbers that you need to purchase
|
01-07-2012, 08:29 PM | #6 |
Not Yet Wild
Join Date: Jul 2010
Location: Winchester, KY 40391
Posts: 39
|
Re: NEED Shocks 17548G1
Hey Coltf1991 heres some pics
i measured the over all length and its 12-1/4" and 9-1/4" compressed Here is the shock with coilover removed Let me know if this is what you need Thanks for your help |
01-08-2012, 03:56 AM | #7 |
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: NEED Shocks 17548G1
6g 0da0n you ned a coil shoc ouch let me sober firs tomarow
|
01-08-2012, 06:35 PM | #8 |
Not Yet Wild
Join Date: Jul 2010
Location: Winchester, KY 40391
Posts: 39
|
Re: NEED Shocks 17548G1
No problem
|
01-08-2012, 06:42 PM | #9 |
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: NEED Shocks 17548G1
You need a coilover shock, with spring perch. Sorry last night was 21st bday, rough night.
Let me do some research and I will get back with you. Thanks for the supplied information. Colton |
01-08-2012, 11:31 PM | #10 |
Not Yet Wild
Join Date: Jul 2010
Location: Winchester, KY 40391
Posts: 39
|
Re: NEED Shocks 17548G1
Happy Birthday and again thanks for your help!!!!!!!!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Looking for CC DS take-off shocks! | Golf Carts and Parts | |||
Air shocks | Electric EZGO | |||
New Shocks | Lifted Golf Carts | |||
Air Shocks | Lifted Golf Carts | |||
MY Shocks, ANY Shocks: The angle vs. the dangle | Lifted Golf Carts |