|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
01-03-2012, 04:51 PM
|
#1 |
|
Getting Wild
Join Date: Dec 2010
Posts: 94
|
pds cart from scratch no speed
 Hello again everyone I just put the final wire into my cart today and am a little depresed. First all let me start with the cart is a 1997 pds thats righ a 97 PDS. What I dis was used an extra sepex motor and controller out of a 2008 pds that i replaced all the functional parts from. so after ordering harness and new pedal assembly and all wiring. When I got it moving the torque is good but it just has no speed. Its not struggling just no top end. So off my conserns include pedal box wiring configuation since I cant find any clear info on it. Also ScottyB if you can email me one of your world famous wiring guides I misplaced the one that came with my altrax controler.Please help me correct this issue. More info stock controller and motor batteries are good 2010 trojans 36v does have 5" lift with 22" tires. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-03-2012, 04:59 PM
|
#2 |
|
Not Yet Wild
Join Date: May 2009
Location: Worlds most beautiful beach
Posts: 26
|
Re: pds cart from scratch no speed
How is your controller jumpered?
|
|
|
|
|
01-03-2012, 05:01 PM
|
#3 |
|
Getting Wild
Join Date: Dec 2010
Posts: 94
|
Re: pds cart from scratch no speed
jumpered?? not really sure what you are asking
|
|
|
|
|
01-03-2012, 07:05 PM
|
#4 |
|
Gone Wild
 Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: pds cart from scratch no speed
Go to alltraxinc.com then go to their document depot everything you will need is there. As far as diagrams go.
What's the condition of your batteries? |
|
|
|
|
01-03-2012, 07:06 PM
|
#5 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: pds cart from scratch no speed
By condition I don't mean good or bad, I mean voltage ad SG readings.
Also a big tires on a stock PDS cart is a terrible idea. That right there will strain your system ALOT! |
|
|
|
|
01-03-2012, 07:21 PM
|
#6 |
|
Getting Wild
Join Date: Dec 2010
Posts: 94
|
Re: pds cart from scratch no speed
There good showing 37.8 after charge
|
|
|
|
|
01-03-2012, 07:54 PM
|
#7 |
|
Getting Wild
Join Date: Dec 2010
Posts: 94
|
Re: pds cart from scratch no speed
I know stock controller is not good but have driven other lifted with stock and was not this bad
|
|
|
|
|
01-03-2012, 08:00 PM
|
#8 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: pds cart from scratch no speed
Is that 37.8v right after charge or after they have sat for 12 hours untouched?
|
|
|
|
|
01-03-2012, 08:56 PM
|
#9 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: pds cart from scratch no speed
38.4 is a full settled charge so that right there says the batteries are not at 100%
But with a conversion like yours? Not sure I grasped what you did... DCS to PDS? Series to PDS? You using the stock PDS controller? |
|
|
|
|
01-03-2012, 09:24 PM
|
#10 |
|
Getting Wild
Join Date: Dec 2010
Posts: 94
|
Re: pds cart from scratch no speed
All electrical is PDs including motor just the frame was a dcs cart do basically my question is why would PDs be slow never had this particular prob before controller and motor just came out of other PDs cart since upgraded to plum quick motor and controller
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| MCOR? Speed Sensor? Controller? Cart Runs at half speed. Advice, please. | Electric Club Car | |||
| scratch removal in aluminum | Electric Club Car | |||
| Starting from scratch | Extreme DC! | |||
Linear Mode
