A few questions with pics attatched

cableguy_hd · 01-20-2012, 08:46 PM

are longer U bolts available for lift kits? Mine appear to be a tad too short?
should I get just a HD cam or entire HD F/R switch?
In pic #2 is that the reverse beeper with the leads?

Spawn · 01-20-2012, 08:59 PM

OK I see the pics but not the question. What I do see is a switch that is cleaned but has had some major heat pass through it as evidenced by the blistering of the contacts. looks like It may qualify for a HD cam upgrade from Scotty B.

cableguy_hd · 01-20-2012, 09:22 PM

Quote:

Originally Posted by Spawn

OK I see the pics but not the question. What I do see is a switch that is cleaned but has had some major heat pass through it as evidenced by the blistering of the contacts. looks like It may qualify for a HD cam upgrade from Scotty B.

Blistering meaning the small pitting on the copper? and can the individual lugs be replaced in pic 3?

Gonkulor · 01-21-2012, 03:47 AM

I have the same U bolt trouble, I'm half a thread shy of flush. My standard is 1 to 3 threads protruding. I have looked all around my area and I haven't found longer ones yet. I may have to make them. The item in question in pic #2 is the reverse beeper with the leads.

cableguy_hd · 01-21-2012, 06:58 AM

my U bolts were fine in lenght until I added my new HD 4 leaf rear springs.... thats the bad part

Gonkulor · 01-21-2012, 07:30 AM

Wow. Thanks for bringing that up. I didn't even think about when I get new springs. Hope you find a solution.

cableguy_hd · 01-21-2012, 07:46 AM

pic 4. the single wire to the right is where the blue wire from the key or pedal attaches. the wire shown goes to the first positive of the battery with a fuse in between. why?

madoc1 · 01-21-2012, 09:47 AM

maybe this will help. i think that is ms2, not ms4.

madoc1 · 01-21-2012, 09:55 AM

Quote:

Originally Posted by cableguy_hd

my U bolts were fine in lenght until I added my new HD 4 leaf rear springs.... thats the bad part

had the same problem, but since it was lifted with the spring over, i just left it. 2 yrs later, no problems.

cableguy_hd · 01-21-2012, 09:56 AM

thanks but I cant read those things at all..... wish I could

the prints that is

01-20-2012, 08:46 PM	#1
cableguy_hd Gone Wild Join Date: Nov 2011 Location: Danville,Va. Posts: 654	A few questions with pics attatched are longer U bolts available for lift kits? Mine appear to be a tad too short? should I get just a HD cam or entire HD F/R switch? In pic #2 is that the reverse beeper with the leads?

01-21-2012, 03:47 AM	#4
Gonkulor Astronautilator Join Date: Sep 2011 Location: North Idaho Posts: 1,494	Re: A few questions with pics attatched I have the same U bolt trouble, I'm half a thread shy of flush. My standard is 1 to 3 threads protruding. I have looked all around my area and I haven't found longer ones yet. I may have to make them. The item in question in pic #2 is the reverse beeper with the leads.

01-21-2012, 06:58 AM	#5
cableguy_hd Gone Wild Join Date: Nov 2011 Location: Danville,Va. Posts: 654	Re: A few questions with pics attatched my U bolts were fine in lenght until I added my new HD 4 leaf rear springs.... thats the bad part

01-21-2012, 07:46 AM	#7
cableguy_hd Gone Wild Join Date: Nov 2011 Location: Danville,Va. Posts: 654	Re: A few questions with pics attatched pic 4. the single wire to the right is where the blue wire from the key or pedal attaches. the wire shown goes to the first positive of the battery with a fuse in between. why?

01-21-2012, 09:56 AM	#10
cableguy_hd Gone Wild Join Date: Nov 2011 Location: Danville,Va. Posts: 654	Re: A few questions with pics attatched thanks but I cant read those things at all..... wish I could the prints that is

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-20-2012, 08:59 PM	#2
Spawn Gone Wild Join Date: Dec 2010 Location: Jax FL Posts: 598	Re: A few questions with pics attatched OK I see the pics but not the question. What I do see is a switch that is cleaned but has had some major heat pass through it as evidenced by the blistering of the contacts. looks like It may qualify for a HD cam upgrade from Scotty B.

01-21-2012, 07:30 AM	#6
Gonkulor Astronautilator Join Date: Sep 2011 Location: North Idaho Posts: 1,494	Wow. Thanks for bringing that up. I didn't even think about when I get new springs. Hope you find a solution.

Similar Threads
Thread	Forum
lots of pics/lots of questions txt belt, hei conversion, general info	Gas EZGO
New project lot's of pics and a few questions	Electric golf carts
1st cart - build project with pics - lots of questions	Lifted Golf Carts
Carnage Pics w/ questions	Gas EZGO
1986 Club Car CPP big block conversion: pics & questions	Big Block Talk!