lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-06-2008, 09:01 AM   #21
Not Yet Wild
 
Join Date: Oct 2008
Posts: 40
Default Re: Turn signal and brake light wiring

It is a light bar with two wires comming out to conect. The lights work fin but not the signal. I am thinking I need to tap into the orange signal lights on the sides vice the two wires comming from the main. I wired it exactley as the diagram and this is the last thing I havent tried. Light bars, is ther somethign different?
Thanks,
ezgo2009 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-06-2008, 04:41 PM   #22
Not Yet Wild
 
Join Date: Oct 2008
Posts: 40
Default Re: Turn signal and brake light wiring

Andy,
The lights are grounded through a wire. black/white according to instructions. I am still out of luck tho
ezgo2009 is offline   Reply With Quote
Unread 10-06-2008, 05:13 PM   #23
Stay thirsty my friends!
 
gornoman's Avatar
Mixed Breed
 
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 25,020
Default Re: Turn signal and brake light wiring

Take a look at the socket that the amber bulbs are in. If that socket only has 2 wires coming off it you have a simple running light that is intended to be ON while the headlights are on. It will not blink because it is tied into the headlight circuit. If that same socket has 3 wires we can work something out.
Another option would be to isolate the hot wire for each of these running lights from the headlight circuit and hook them to the appropriate turn signal wires. This means they will be OFF when the headlights are on, but they would blink when the lever is moved.
gornoman is offline   Reply With Quote
Unread 10-06-2008, 05:21 PM   #24
72 volts!
 
Andy4639's Avatar
E-Z-GO
 
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 5,412
Default Re: Turn signal and brake light wiring

I ran into this on a buddies cart at the beach. He wanted the amber running lights and turn signals. I ended up placing another set of amber lights below the cowl so he would have both. Myself I didn't like the way it looked but it was his cart.
Look at the amber lights and if there is two wires then you can cut them and run the wires back to the turnsignals. You will have to run your own wires though. Most amber lights are singal elements.
Snip the two wires off the connectors that goes to the amber lights and tie the two grounds together and run seperate wires for the light back to signal lever wiring and connect as directions state. Run the grounds back to the battery - post.




Andy4639 is offline   Reply With Quote
Unread 10-19-2008, 08:21 AM   #25
Not Yet Wild
 
Join Date: Oct 2008
Posts: 40
Default Re: Turn signal and brake light wiring

I think I have this figured out but, can someone take a look at this picture and let me know if I am tracking? If this works then I will tackle the brake light/switch. I plan to connect the hots from the outside amber but leave the grounds connected as they are.
Attached Images
File Type: jpg lights.jpg (85.0 KB, 59 views)
ezgo2009 is offline   Reply With Quote
Unread 10-19-2008, 01:14 PM   #26
72 volts!
 
Andy4639's Avatar
E-Z-GO
 
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 5,412
Default Re: Turn signal and brake light wiring

Yes you can leave the grounds just need to connect the hots to the turn signal lever!!Correct!
Andy4639 is offline   Reply With Quote
Unread 10-19-2008, 02:06 PM   #27
Not Yet Wild
 
Join Date: Oct 2008
Posts: 40
Default Re: Turn signal and brake light wiring

Thanks Andy,
Tried it and no go. so I put the ground to a terminal ground, stil nothing. from the turn lever there is a white ground. grounded it and nothing. Then there is a hot for the brake switch. I thought this might need a rune to complete the circuit. Stil nothing. I am lost! unless possibly te turn lever is bad?
ezgo2009 is offline   Reply With Quote
Unread 10-19-2008, 06:22 PM   #28
Not Yet Wild
 
Join Date: Oct 2008
Posts: 40
Default Re: Turn signal and brake light wiring

I am going to try a new turn lever. more to follow
ezgo2009 is offline   Reply With Quote
Unread 10-19-2008, 07:01 PM   #29
72 volts!
 
Andy4639's Avatar
E-Z-GO
 
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 5,412
Default Re: Turn signal and brake light wiring

Do you have the turn signal hot wired? You have to feed the turn signal to get them to work.
Andy4639 is offline   Reply With Quote
Unread 10-20-2008, 09:09 AM   #30
Not Yet Wild
 
Join Date: Oct 2008
Posts: 40
Default Re: Turn signal and brake light wiring

Yes, the red wire with the fuse I connected to a positive battery terminal. The black ground is to the negative terminal. The only wires I do not have connected are the white and the red brake switch wire. I did the white lever ground but still nothing. The hot from the bulb is going into the flasher as per directions. Still missing something?
ezgo2009 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
EZGO brake light switch Electric EZGO
Brake light ? Gas Yamaha
Brake light switch Gas Yamaha
48v light wiring diagrams Electric Club Car
93 ez-go directional light wiring Gas EZGO


All times are GMT -5. The time now is 11:54 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.