|
|||||||
| Notices |
| Electric EZGO Electric EZGO Marathon, Medalist, TXT and RXV. |
|
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
#1 |
|
Not Yet Wild
Join Date: Jun 2008
Location: Woodland Hills So Cal
Posts: 25
|
I've adjust the cable but still not stopping to any satisfaction I pulled the drums inspected and cleaned (springs look good) shoes are glazed Not sure if I need to replace cause they remaining shoe measures 2.5mm Does anybody know the spec of a new on and if I do order new shoes should I replace the springs OR any adjustments I can make
Thanks Matt |
|
|
|
|
|
|
|
|
#2 |
|
Gone Wild
Join Date: Jan 2007
Location: Liberty SC
Posts: 532
|
When you adjusted the cables did you adjust the star wheel inside the hub first? If not try that. It's the wheel with teeth on it inside the hub. Get it set so the hub is just snug going on without the brakes being applied. I take the pin out of the brake on the backside of the hub before doing any adjusting.this way you know it's the star wheel that is right then hook it back up to do cables.
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| EZGO brake light switch | Electric EZGO | |||
| electric ezgo | Electric EZGO | |||
| Club Car Brake Assembly with Pads-New | Golf Carts and Parts | |||
| replacing brake shoes 97 electric | Test Post | |||
| 2004 ezgo TXT electric brake issue | Electric EZGO | |||