|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-13-2012, 03:50 PM | #1 |
Not Yet Wild
Join Date: Aug 2011
Posts: 16
|
Burned up forward reverse switch
Does any one have a full wiring diagram or pictures for a 99 txt ezgo? I download a manual from this site but it was for 2001 and newer. The fire started at the forward reverse swich and that seemed to take the biggest hit. Any help or suggestions would be greatly appriciated. I can wrench on anything but just starting to learn the electrical stuff!!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-13-2012, 06:05 PM | #2 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,344
|
Re: Burned up forward reverse switch
Quote:
I'm sorry to hear about your trouble. I have only seen one other cart actually flame up at the F&R. Be sure to figure out what caused the fire and replace the parts with HD parts. |
|
02-13-2012, 06:51 PM | #3 |
Not Yet Wild
Join Date: Aug 2011
Posts: 16
|
Re: Burned up forward reverse switch
Thank you very much! I have one more question for now, I have been searching for the new switch and have found the factory ones and the beefed up ones. They say if you are going to eventually lift it, I should bye the beefed up one. Will the beefed up one be okay to use on the stock parts for now? I dont plan on lifting this year just want to get it running again for the girls.
|
02-13-2012, 07:08 PM | #4 |
Gone Wild
Join Date: Aug 2011
Location: Central Delaware
Posts: 859
|
Re: Burned up forward reverse switch
If you have any thoughts of doing any modifications in the future, buy what you need now. Or, at least what is transferable. Were I you, I would replace the F&R switch with a HD model and change ALL the high power wires to (at least), 4 gauge (g), now. There is no sense or savings in buying things twice. Since you fried the F&R, it would be a very good idea to have the controller, solenoid and motor tested by a competent shop. If any are bad or of diminished capacity, replace them (HD), too.
|
02-13-2012, 09:21 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,344
|
Re: Burned up forward reverse switch
A HD F&R is an excellent choice.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
97 TXT Forward Reverse Switch | Electric EZGO | |||
Forward Reverse switch limit switch | Electric Club Car | |||
Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car | |||
85 Forward /reverse Switch | Electric Club Car |