|
|||||||
| Notices |
| Electric EZGO Electric EZGO Marathon, Medalist, TXT and RXV. |
|
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
#1 |
|
Not Yet Wild
Join Date: Jun 2008
Posts: 2
|
I have an 85 electric 3 wheeler. I replaced the batteries and cart runs great, i can ride for days without recharging. I was wanting to know if they make rims for a 3 wheeler.
|
|
|
|
|
|
|
|
|
#2 |
|
The Welcome Guy
Join Date: Jan 2007
Location: Wichita Falls Texas - My Rides 1996 E-Z-GO and 2002 Club Car IQ and 2003 Club Car IQ
Posts: 2,546
|
Welcome to the forum Gamecock cart........................
The back wheels are no problem but you may have to some serious searching for that front wheel. I have seen them for cushman 3 wheel scooters, but they are narrow and have a different bolt pattern. |
|
|
|
|
|
#3 |
|
Not Yet Wild
Join Date: Jun 2008
Posts: 2
|
O well, guess some hubbies will work for now, i was told to get a set of 4 and drill a hole in 2 of them for the pin on the front tire. I only have 600 bucks in the cart so not that bad.
Thanks |
|
|
|
|
|
#4 |
|
GhEtTo PrAnKsTeR
Join Date: Jun 2007
Location: Kaufman, Texas
Posts: 3,016
|
Yes, drilling the hole works great. You could put some on the rear and use a hub cap on the front. I don't think it would look bad.
|
|
Golf Cars | Lifted Golf Carts | Electric Golf Carts
Custom EZGO | B&S V-Twin | All Sports Long Travel Lift | 8:1 Gears | 22" Titan AT489's | | | | | | |
|
|
|
|
|
|
|
#5 |
|
Not Yet Wild
Join Date: Jun 2008
Location: Bridgeport, MI
Posts: 11
|
found this on ebay. looks like he bought 4 and drilled out the centers like you suggested.
looks good to me! Hope this helps! Taz |
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Whats best to do????? | Lifted Golf Carts | |||