06-30-2008, 10:08 PM | #1 |
Not Yet Wild
Join Date: Jun 2008
Posts: 2
|
Whats up
I have an 85 electric 3 wheeler. I replaced the batteries and cart runs great, i can ride for days without recharging. I was wanting to know if they make rims for a 3 wheeler.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2008, 10:20 PM | #2 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: Whats up
Welcome to the forum Gamecock cart........................
The back wheels are no problem but you may have to some serious searching for that front wheel. I have seen them for cushman 3 wheel scooters, but they are narrow and have a different bolt pattern. |
06-30-2008, 10:51 PM | #3 |
Not Yet Wild
Join Date: Jun 2008
Posts: 2
|
Re: Whats up
O well, guess some hubbies will work for now, i was told to get a set of 4 and drill a hole in 2 of them for the pin on the front tire. I only have 600 bucks in the cart so not that bad.
Thanks |
07-01-2008, 06:29 AM | #4 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Whats up
Yes, drilling the hole works great. You could put some on the rear and use a hub cap on the front. I don't think it would look bad.
|
07-02-2008, 10:29 PM | #5 |
Gone Wild
Join Date: Jun 2008
Location: Bridgeport, MI
Posts: 392
|
Re: Whats up
found this on ebay. looks like he bought 4 and drilled out the centers like you suggested.
looks good to me! Hope this helps! Taz |
|
|
Similar Threads | ||||
Thread | Forum | |||
Whats best to do????? | Lifted Golf Carts |