![]() |
| |||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() |
| | Thread Tools | Search this Thread | Display Modes |
| | #1 |
| Not Yet Wild Join Date: Feb 2012 Location: Alabama
Posts: 28
| Just started to try to break in new batterys, not sure if charger is programed in right plugged it up batt.1 8.77, batt. 2 batt. 8.76, batt. 8.77, batt.4,8.74,,batt.5,8.74, batt6, 8.76 Pack voltage52.4 Got a new charger think it's a accusence which is programable all the instructions for programing is for 200 amp hrs so I programmed for that even though my batterys is 175 amp hours got worried it was over charging the batteries, just wondering what your thoughts was on this. It is a 2002 pds, unpluggeg the charger, till I get this figured out any feed back would be appreciated. |
| | |
| | |
| __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
| | #2 |
| Carts Unlimited ![]() Join Date: Dec 2007 Location: So Cal
Posts: 46,426
| I'm not familiar with that charger but the cut off voltage for a 48v pack is about 63v regardless of amp hr rating... hope this helps. It's probably putting out 20 amps for first phase instead of 17.5 but that won't hurt the batteries... Let it charge. |
| | |
| | #3 |
| Not Yet Wild Join Date: Feb 2012 Location: Alabama
Posts: 28
| Thanks ScottyB, thatn is what I was hoping for now I will continue per your your break in instructions. |
| | |
![]() |
| ||||||
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| 1990 Club car With flat head Rev limiter question and govenor question | Gas Club Car | |||