Lite's on my 36v eazy go cart ???

Big Dawg

It came with lights ,but they wont come on, switch,two wires ,one going to the hot ,and another going to the ground to one of the 6v batteries and it has a fuse link . Fuse good, wires tight , havent checked the bulbs yet ,that will be next. What is;nt the lights working ?

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Canine_Rescue_Pilot

Check the bulb(s) first. Things oxidize when they sit too long. You might just find the bulb bases needs to be cleaned an reseated.

Do you own a volt meter?

Rickochet

In the FWIW category, assuming your lights are 12v, the two wires should not come from one battery. The (+) comes from the (+) of one battery and the - needs to come from another battery joined to the other battery in series to get the 12v. Start checking the wires from the battery terminals on out. I have a 3' wire with alligator clips on both ends I attach one end to the battery (-) and the other to multimeter (-) probe. Then all you have to do is start testing the (+) points in the switch, fuse holder and lights.

Big Dawg

Turnes out the switch was bad ,replaced and it works now . Thanks guys !