1988 ezgo micro switch

jcbj · 07-06-2008, 09:47 AM

My ezgo has the 2 micro switches are gone , Do I need them? If not how can I wire it up to work? thanks

jcbj · 07-06-2008, 10:06 AM

it has switch ms3

roady89 · 07-06-2008, 11:25 AM

Welcome to BGW!

MS3 for the throttle Micro...ok. From one side on the micro to 36VDC positive (+) and the other side to one of the small terminals on the solenoid.....other small terminal on the solenoid to a 36VDC Negative (-)...that will get your solenoid activating.

That is the simplest form. You could wire through a key switch..ect. Good Luck and let us know how it's going with your project!

jcbj · 07-06-2008, 01:17 PM

can you show me in a diagram? thanks

roady89 · 07-06-2008, 01:19 PM

Quote:

Originally Posted by jcbj

can you show me in a diagram? thanks

A diagram doesn't exist. It's pretty straight forward.

jcbj · 07-06-2008, 01:49 PM

this is what i got , Key switch one side to pos of battery other side of key goes to ms3 and the other side of the ms3 to a little bolt on the solenoid and on the other little bolt a wire goes to neg of a batt.

roady89 · 07-06-2008, 01:52 PM

Sounds great! The only reason it will not work is:

1. Bad Key Switch
2. Bad Microswitch
3. Bad solenoid.

Give it a try and let me know.

jcbj · 07-06-2008, 01:58 PM

it goes, thanks

roady89 · 07-06-2008, 01:59 PM

It "goes"...The whole cart runs now?

jcbj · 07-06-2008, 02:22 PM

yep goes good but the power speed control sparks alittle , it all new, will it wear in ?

07-06-2008, 09:47 AM	#1
jcbj Not Yet Wild Join Date: Jul 2008 Posts: 7	1988 ezgo micro switch My ezgo has the 2 micro switches are gone , Do I need them? If not how can I wire it up to work? thanks
jcbj Not Yet Wild Join Date: Jul 2008 Posts: 7

07-06-2008, 10:06 AM	#2
jcbj Not Yet Wild Join Date: Jul 2008 Posts: 7	Re: 1988 ezgo micro switch it has switch ms3
jcbj Not Yet Wild Join Date: Jul 2008 Posts: 7

07-06-2008, 11:25 AM	#3
roady89 Brkn it dwn BaRnEy StYlE Join Date: Jun 2007 Location: Kaufman, Texas Posts: 3,449	Re: 1988 ezgo micro switch Welcome to BGW! MS3 for the throttle Micro...ok. From one side on the micro to 36VDC positive (+) and the other side to one of the small terminals on the solenoid.....other small terminal on the solenoid to a 36VDC Negative (-)...that will get your solenoid activating. That is the simplest form. You could wire through a key switch..ect. Good Luck and let us know how it's going with your project!
	Golf Carts \| Lifted Golf Carts \| Electric Golf Carts Custom EZGO \| B&S V-Twin \| All Sports Long Travel Lift \| 8:1 Gears \| 22" Titan AT489's \| \| \| \| \| \| \|

07-06-2008, 01:17 PM	#4
jcbj Not Yet Wild Join Date: Jul 2008 Posts: 7	Re: 1988 ezgo micro switch can you show me in a diagram? thanks
jcbj Not Yet Wild Join Date: Jul 2008 Posts: 7

07-06-2008, 01:49 PM	#6
jcbj Not Yet Wild Join Date: Jul 2008 Posts: 7	Re: 1988 ezgo micro switch this is what i got , Key switch one side to pos of battery other side of key goes to ms3 and the other side of the ms3 to a little bolt on the solenoid and on the other little bolt a wire goes to neg of a batt.
jcbj Not Yet Wild Join Date: Jul 2008 Posts: 7

07-06-2008, 01:52 PM	#7
roady89 Brkn it dwn BaRnEy StYlE Join Date: Jun 2007 Location: Kaufman, Texas Posts: 3,449	Re: 1988 ezgo micro switch Sounds great! The only reason it will not work is: 1. Bad Key Switch 2. Bad Microswitch 3. Bad solenoid. Give it a try and let me know.
	Golf Carts \| Lifted Golf Carts \| Electric Golf Carts Custom EZGO \| B&S V-Twin \| All Sports Long Travel Lift \| 8:1 Gears \| 22" Titan AT489's \| \| \| \| \| \| \|

07-06-2008, 01:58 PM	#8
jcbj Not Yet Wild Join Date: Jul 2008 Posts: 7	Re: 1988 ezgo micro switch it goes, thanks
jcbj Not Yet Wild Join Date: Jul 2008 Posts: 7

07-06-2008, 01:59 PM	#9
roady89 Brkn it dwn BaRnEy StYlE Join Date: Jun 2007 Location: Kaufman, Texas Posts: 3,449	Re: 1988 ezgo micro switch It "goes"...The whole cart runs now?
	Golf Carts \| Lifted Golf Carts \| Electric Golf Carts Custom EZGO \| B&S V-Twin \| All Sports Long Travel Lift \| 8:1 Gears \| 22" Titan AT489's \| \| \| \| \| \| \|

07-06-2008, 02:22 PM	#10
jcbj Not Yet Wild Join Date: Jul 2008 Posts: 7	Re: 1988 ezgo micro switch yep goes good but the power speed control sparks alittle , it all new, will it wear in ?
jcbj Not Yet Wild Join Date: Jul 2008 Posts: 7

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
1988 gas ezgo	Gas EZGO
1996 48 volt won't run - solenoid or micro switch	Electric Club Car
Can The Micro Switch Short Out?	Gas Yamaha
1988 ezgo gas	Gas EZGO
micro switch	Electric EZGO