|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-27-2012, 09:59 PM | #1 |
EZ come EZ go
Join Date: Apr 2012
Location: Parkland FL
Posts: 1,412
|
Help!! Can not get new controller working..
Just got a 400 amp controller from D&D - Can not for the life of me get it hooked up correctly. Finally stopped sparking when I connected the terminal, and volt meter turns on - but no go...
Do have the new solenoid as well - 400 ??? Please help - I'm dying here. New FNR - 30 minute install New motor - 5 minute install New controller - 10 hours.... to be continued... |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-27-2012, 10:18 PM | #2 |
EZ come EZ go
Join Date: Apr 2012
Location: Parkland FL
Posts: 1,412
|
Re: Help!! Can not get new controller working..
Crap picture, but this is it.
My OEM had B- B+ M1 A2 This only has B- B+ M1 Do you ignore A2 to FNR? Where do charger wires go? What connections go to each terminal? I followed the diagram to a tee - my neighbor is an electrical engineer, tested all on the volt meter - all are good. He couldn't get it goin..... |
04-28-2012, 05:03 AM | #3 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Help!! Can not get new controller working..
This will answer your A2 question. It, and dozens of others, are available for downloading from EV Drives.
|
04-28-2012, 05:58 AM | #4 |
EZ come EZ go
Join Date: Apr 2012
Location: Parkland FL
Posts: 1,412
|
Re: Help!! Can not get new controller working..
"for units without A2 - bolt the two wires together and tape connection"
Which two wires? Am I taking wire from A2 to C and A2 to A2 and piecing together, so that C goes directly to A2 motor? Thank you... this diagram is different from the one sent. Really appreciate it |
04-28-2012, 08:03 AM | #5 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Help!! Can not get new controller working..
Go directly from motor A2 to FNR C. The only reason to do what Alltrax recommended is if you already have controller A2 wires, and you can't do what I said in my first sentence.
|
04-28-2012, 08:28 AM | #6 |
EZ come EZ go
Join Date: Apr 2012
Location: Parkland FL
Posts: 1,412
|
Re: Help!! Can not get new controller working..
Ok, done. Now where do charger cables go?
|
04-28-2012, 08:37 AM | #7 |
EZ come EZ go
Join Date: Apr 2012
Location: Parkland FL
Posts: 1,412
|
Re: Help!! Can not get new controller working..
Wire from fnr com goes where?
|
04-28-2012, 09:04 AM | #8 |
EZ come EZ go
Join Date: Apr 2012
Location: Parkland FL
Posts: 1,412
|
Re: Help!! Can not get new controller working..
OK, here is where I'm at..
Need to hook charger white and black, and blue relay from FNR to ? |
04-28-2012, 09:40 AM | #9 |
EZ come EZ go
Join Date: Apr 2012
Location: Parkland FL
Posts: 1,412
|
Re: Help!! Can not get new controller working..
Looking at this pic posted by D-A..
DO I hook both charger cables - white and black to the same post on solenoid with blue "com" cable coming from FNR? If so, which post - the B+ is running to one post now. |
04-28-2012, 10:00 AM | #10 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Help!! Can not get new controller working..
The wires from charger receptacle connect to the battery pack.
Black wire from charger receptacle goes to Neg. terminal on Right-Rear battery. White wire from charger receptacle goes to Pos. terminal on Right-Front battery via a 50A or 60A fuse. If a 250A or 400A fuse came with controller, it also goes on Pos. terminal of Right-Front battery and high current cable that goes to battery side of solenoid main terminals connects to it |
|
|
Similar Threads | ||||
Thread | Forum | |||
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
WTB - Non-Working Curtis 1204/1205 Controller(s) | Golf Carts and Parts | |||
'85 G2E Not Working | Electric Yamaha | |||
1999 CLub car w/ new controller not working | Electric Club Car | |||
HELP - New Controller Not Working Right | Electric Club Car |