Other bodies..

KM Parrish · 07-12-2008, 09:27 PM

Ok folks! Now that it looks like it's going to run, I would like to put light plastic body over this one. I want a paintball Tank. hehehe.

Any one doing odd things to theirs?

Keith.

roady89 · 07-12-2008, 09:44 PM

Km, not to get off the subject here but I have to ask you about your avatar? I've always wanted an Ultra-lite aircraft but the misses won't let me.

outback · 07-12-2008, 11:21 PM

Ditto on roady's flying interests. The most I have been able to wrangle has been a towable water toy that flys, but that thing will hurt you. I'm getting too old for hard landings..., even if they are on water.

BTW, I saw a Ford Coupe body on Craigslist for a few hundred. Wouldn't want to turn it into a paintball tank, but it sure would look good on a set of nice wheels.

If you're not particular about who see's the rig, or entering it in a beauty contest..., with some sheet metal and a little creativity you can make anything you want.

KM Parrish · 07-13-2008, 01:09 PM

Quote:

Originally Posted by roady89

Km, not to get off the subject here but I have to ask you about your avatar? I've always wanted an Ultra-lite aircraft but the misses won't let me.

Hey there outback

It's a 2005 Quicksilver Sport. It has a 40 hp. Rotax 2 stroke engine. I built this from October 2004 until May 2005. It flies about 50 mph. burns 3 gph. and goes about 80 miles on a 6 gallon Tank of gas. But now, my favorite ground transport will be my 1980 EZ-GO.
Soon, to become a paintball Tank once I get this ez-go sorted out

roady89 · 07-13-2008, 01:25 PM

I suppose it would be better than this. LOL! That sounds like a sweet plan.

Paintball tank

KM Parrish · 07-13-2008, 03:34 PM

Jeez.. I hope so..

I want to do a body out of 10 ml. chloroplast. I figure I can slip it over the existing body. After I sort out new toy.

Fishing Dude · 07-13-2008, 06:21 PM

Heck bring it over can always weld somthing up put a piece of pipe on it and make it shoot waterbaloons filled with paint useing hair spray as propelent. Heck they have a few extra tank hulks over at Camp Perry maybe we could get one of those. lol

cloggs · 07-13-2008, 07:07 PM

not to be crashing your thread, what is craigslist? just wandering

outback · 07-13-2008, 08:01 PM

What is CRAIGSLIST??

Oh man! You're missing out! Go to...., www.craigslist.com

This is a national open classified, WTB/WTS. Just select your state and region, then do a key word browse for what you're looking for.

They give ebay a run for their money without the bidding hassle, but since it's person to person buy/sell you need to be cautious.

KM Parrish · 07-15-2008, 01:03 AM

Hey there Dude

I haven't gotten as far as firing up a rosebud just yet. I just got a good set of measurements today. I plan to make a truck front end for practice first.
Any opinions pro or con about using 1/2 inch insulating foam panels for a building medium? I want to put a skin of fiberglass over that. Pix to follow soon.

07-12-2008, 09:27 PM	#1
KM Parrish Not Yet Wild Join Date: Jul 2008 Location: Willows Ca. Posts: 22	Other bodies.. Ok folks! Now that it looks like it's going to run, I would like to put light plastic body over this one. I want a paintball Tank. hehehe. Any one doing odd things to theirs? Keith.

07-12-2008, 09:44 PM	#2
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: Other bodies.. Km, not to get off the subject here but I have to ask you about your avatar? I've always wanted an Ultra-lite aircraft but the misses won't let me.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

07-12-2008, 11:21 PM	#3
outback Getting Wild Join Date: Jun 2008 Location: Garland, TX Posts: 142	Re: Other bodies.. Ditto on roady's flying interests. The most I have been able to wrangle has been a towable water toy that flys, but that thing will hurt you. I'm getting too old for hard landings..., even if they are on water. BTW, I saw a Ford Coupe body on Craigslist for a few hundred. Wouldn't want to turn it into a paintball tank, but it sure would look good on a set of nice wheels. If you're not particular about who see's the rig, or entering it in a beauty contest..., with some sheet metal and a little creativity you can make anything you want.

07-13-2008, 01:25 PM	#5
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: Other bodies.. I suppose it would be better than this. LOL! That sounds like a sweet plan.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

07-13-2008, 03:34 PM	#6
KM Parrish Not Yet Wild Join Date: Jul 2008 Location: Willows Ca. Posts: 22	Re: Other bodies.. Jeez.. I hope so.. I want to do a body out of 10 ml. chloroplast. I figure I can slip it over the existing body. After I sort out new toy.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-13-2008, 06:21 PM	#7
Fishing Dude Gone Wild Join Date: Jul 2008 Location: Slums of Lake Erie Posts: 3,721	Re: Other bodies.. Heck bring it over can always weld somthing up put a piece of pipe on it and make it shoot waterbaloons filled with paint useing hair spray as propelent. Heck they have a few extra tank hulks over at Camp Perry maybe we could get one of those. lol

07-13-2008, 07:07 PM	#8
cloggs Not Yet Wild Join Date: Dec 2007 Location: Loogootee IN Posts: 44	Re: Other bodies.. not to be crashing your thread, what is craigslist? just wandering

07-13-2008, 08:01 PM	#9
outback Getting Wild Join Date: Jun 2008 Location: Garland, TX Posts: 142	Re: Other bodies.. What is CRAIGSLIST?? Oh man! You're missing out! Go to...., www.craigslist.com This is a national open classified, WTB/WTS. Just select your state and region, then do a key word browse for what you're looking for. They give ebay a run for their money without the bidding hassle, but since it's person to person buy/sell you need to be cautious.

07-15-2008, 01:03 AM	#10
KM Parrish Not Yet Wild Join Date: Jul 2008 Location: Willows Ca. Posts: 22	Re: Other bodies.. Hey there Dude I haven't gotten as far as firing up a rosebud just yet. I just got a good set of measurements today. I plan to make a truck front end for practice first. Any opinions pro or con about using 1/2 inch insulating foam panels for a building medium? I want to put a skin of fiberglass over that. Pix to follow soon.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Club Car & EZ Go Bodies	Golf Carts and Parts
fiberglass bodies in Adel Ga	Golf Carts and Parts
Classic Cart Bodies?	Gas Yamaha
Camo bodies	Electric Club Car
bodies and top	Golf Carts and Parts