Newer Seat

Riles

I have an EZGO with split back rests. Does anyone know if the newer one piece seat will bolt onto the brackets? I have not had a chance to measure the distance on the newer seats. I am mostly refering to the indents on the back plastic piece where the seat bolts to the frame.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Riles

Anyone?

Dela

Looks like it's been done. Though I would bet there is some modification to do..

Attached Images

	i13xc.jpg (69.5 KB, 0 views)
	ezgo85gr.jpg (148.0 KB, 0 views)

Riles

Dont mind some work. I thought maybe they might bolt right up. TY

kernal

I have a '91 Marathon with split seat backs and a '00 TXT with the one piece seat back so I went out and looked at them. First, they are not the same so simple swap is a no go. The one piece bolts to a 2" wide flat metal bracket so the indents are 2" wide. The split back bolts to a 1"x1" (really 3/4x3/4). The indents are about 1" wide. The distance between the mounts on the one piece is 20" and about 20.5" on the split measured centerline to centerline with a tape measure and mark one eyeball.
Sooooo, mounting a one piece on a split back cart looks fairly easy.

Caveats: I'm not a fabricator so I'm not looking at this with trained eye.
I'm assuming all the seat back mounts are the same on TXT's. My
cart is a shuttle model that comes from the factory with a rear
facing back seat. Though unlikely, it is possible the front seat back
mount on these carts is different than the standard cart.

Hope this helps.

Riles

Great. That is what I was looking for. Ty for taking the time to do that for me.