|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-09-2012, 07:23 PM | #1 |
Not Yet Wild
Join Date: Mar 2010
Posts: 16
|
Switched Polarity after putting motor back in
I pulled my motor out to try to fix my not moving problem (Stripped Brake Hub). Apparently when I dismantled everything including the motor I got the stator turned around hence my polarity is switched.....Hmmmm.......
There are two wires on top and two on the bottom. I have my wires in the correct place, but not the rest of the motor. Can I swap two of the wires on top or do I need to do the same two on top and bottom.... A little help please. Thank You!! Last edited by gilldawg79; 05-09-2012 at 07:24 PM.. Reason: Subscribe |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-09-2012, 08:13 PM | #2 |
Not Yet Wild
Join Date: Mar 2010
Posts: 16
|
Re: Switched Polarity after putting motor back in
I got it. Switched the two wires on the F/R switch. Works like a top. Thanks for the help with my previous problem.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Putting the two halves of the motor back together | Gas EZGO | |||
Need help putting steering back together | Electric EZGO | |||
Voltage Regulator Polarity? | Gas EZGO | |||
putting 1996 non dcs cart back together need help! desperately | Electric EZGO | |||
putting a 24hp honda motor in | Big Block Talk! |