Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (http://www.buggiesgonewild.com/)
-   Electric EZGO (http://www.buggiesgonewild.com/electric-ezgo/)
-   -   Rivet free dash. 101. (http://www.buggiesgonewild.com/electric-ezgo/65221-rivet-free-dash-101-a.html)

TheWiltz 06-03-2012 02:25 PM

Rivet free dash. 101.
 
Here is how I put my dash together rivet free. Why? When I rebuild a dinosaur carage ill use rivets untilled then ill step up to the 1800s and use those new fangled bolts and screws.

So here it goes. The ones near the ball holder you can reach with your fingers. No big deal. The ones on the outside you need to drill a few holes.
http://img.tapatalk.com/48d678a2-ab31-d853.jpg

Next, make yourself a sticky finger, I said STICKY finger!! And use it to get the nuts in.
http://img.tapatalk.com/48d678a2-aba3-0f72.jpg

Finally install the bolts. I also replaced the charges port rivets for a cleaner look.
http://img.tapatalk.com/48d678a2-abe6-4fa6.jpghttp://img.tapatalk.com/48d678a2-abf6-722d.jpghttp://img.tapatalk.com/48d678a2-ac05-df5b.jpg

Wiltz

chloe 06-03-2012 06:16 PM

Re: Rivet free dash. 101.
 
Looks fine to me. It may be an issue, with those heads sticking out, if you ever put a dash cover on it. But as is, it look s good.

yurtle 06-04-2012 06:28 AM

Re: Rivet free dash. 101.
 
You "need" to turn them until the slots are all the same, 90 or 45. :mrgreen:

yurtle 06-04-2012 06:29 AM

Re: Rivet free dash. 101.
 
You "need" to turn them until the slots are all the same, 0 or 45. :mrgreen:

TerryH 06-04-2012 08:39 AM

Re: Rivet free dash. 101.
 
Quote:

Originally Posted by yurtle (Post 734186)
You "need" to turn them until the slots are all the same, 0 or 45. :mrgreen:

:iagree:

LostHusker 06-04-2012 08:54 AM

Re: Rivet free dash. 101.
 
Quote:

Originally Posted by yurtle (Post 734186)
You "need" to turn them until the slots are all the same, 0 or 45. :mrgreen:

Umm I thought I was the only picky one :oops::help:

TheWiltz 06-04-2012 10:56 AM

Re: Rivet free dash. 101.
 
Well i'll have you all know that when i looked at my pictures, i noticed they were different and turned them all the same way. So we are all picky!!!! :)

Papajohn011964 06-04-2012 03:43 PM

Re: Rivet free dash. 101.
 
Quote:

Originally Posted by yurtle (Post 734186)
You "need" to turn them until the slots are all the same, 0 or 45. :mrgreen:

Spoken like a true electrician!

Nice work!!!!!

rib33024 06-04-2012 07:48 PM

Re: Rivet free dash. 101.
 
It looks good, I like screws in the dash :thumbup: these slide nuts work good, no holes to drill, there's a thread about this here some where :thumbup:


http://ssongmould.en.alibaba.com/pro...sotherproduct1

TheWiltz 06-04-2012 08:48 PM

Here they are all lined up as X's. Why X? An X is a break in clays. http://img.tapatalk.com/62bf4e03-5772-6e89.jpg

Wiltz


All times are GMT -5. The time now is 08:34 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.