|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-11-2012, 11:35 AM | #1 |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
1997 Ez-Go TXT Series
2 weeks ago I burned up my stock controller and so while the cart was down, I decided to upgrade my components.
Alltrax NPX 4844 controller 4 Gauge welding cable 200 amp soleniod HD FNR switch Now my issue is that after I charged the system, I ran the cart fine for about 5-10 minutes and when I went to go the soleniod just clicked and didnt move, the controller didnt light up either. Pushed the cart in the shop, charged it over night, it only charger 1.5 hours and the next morning the cart ran fine again and I drove it down the drive way, about 1/3 mile and let it sit for about 10 mins talking to someone and went to drive away, again jus a click out of my soleniod. My lights are working just fine...very bright still. Before the first controller went out, the cart would run 1-1.5 hours no problem, with plenty of juice left. Any suggestions?? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-11-2012, 11:47 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 1997 Ez-Go TXT Series
Get a Meter and give us some readings .. Also can you attach the meter to the pack and get some under load readings?
|
07-11-2012, 12:04 PM | #3 |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
Re: 1997 Ez-Go TXT Series
I will try and find a meter...
|
07-11-2012, 05:39 PM | #4 |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
Re: 1997 Ez-Go TXT Series
Im not sure how to test the pack or test under a load, if you can explain how to get these I will...
Full Charge each battery 6.38,6.40,6.45,6.48,6.49,6.50 |
07-11-2012, 07:58 PM | #5 |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
Anybody?
Sent from powders back pocket |
07-11-2012, 08:11 PM | #6 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 1997 Ez-Go TXT Series
To test the pack under load, find a way to securely attach the DVM leads to the plus and minus of the entire pack, or individual batteries, then go climb some hills, while someone reads the DVM.
Were it me, I'd prefer to simply tape the leads to the battery posts, so if it happens to come loose, it's unlikely to short something out. If you use alligator clip jumpers, securely insulate the one to the DVM lead with electrical tape. |
07-11-2012, 08:11 PM | #7 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 1997 Ez-Go TXT Series
after a full charge the cart need to rest for 12 hours before you take battery readings or they will be false, a pack reading is the main POS +, and the main NEG _,
|
07-11-2012, 08:43 PM | #8 | |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
Quote:
Sent from powders back pocket |
|
07-11-2012, 08:46 PM | #9 |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
|
07-11-2012, 09:06 PM | #10 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,284
|
Re: 1997 Ez-Go TXT Series
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Club Car Series Controller + EZGO Series Wound Motor | Electric Club Car | |||
1997 Series Stock TXT with 23" Tires | Electric EZGO | |||
1997 EZGO gas 1997 not firing | Gas EZGO | |||
1997 DCS value | Electric EZGO | |||
6x6V series or 2x3x12V Series/parallel | Electric golf carts |