|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-03-2012, 10:21 AM | #1 |
Not Yet Wild
Join Date: Oct 2008
Posts: 9
|
Lifting a cart?
Has anyone every used a axle kit with a spindle kit to get to get a 12 inch high lift? I was thinking then in the back blocks could be used just like on a real truck this would be on a electric cart 1998 ezgo. Tell me your thoughts I want a bigger lift then a 6 inch.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-03-2012, 10:36 AM | #2 |
Never really finished
Join Date: Jun 2010
Location: Georgia
Posts: 1,102
|
Re: Lifting a cart?
12 in. tall blocks in the rear will create a lot of axle wrap. Mine has 8 inch and I had to build extra supports running from the axle to the swing arm.
|
09-03-2012, 10:38 AM | #3 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Lifting a cart?
|
09-03-2012, 11:06 AM | #4 |
Not Yet Wild
Join Date: Oct 2008
Posts: 9
|
Re: Lifting a cart?
I was thinking of a 6 inch block and the other 6 inches would come from moving the axle to the bottom of the spring in back instead of on top.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
best 2000.00 cart for lifting | Lifted Golf Carts | |||
Lifting my cart | Gas Club Car | |||
Lifting my cart | Lifted Golf Carts | |||
Un-Lifting a Cart | Electric Club Car | |||
best golf cart for lifting | Lifted Golf Carts |