|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-06-2012, 09:47 PM | #1 |
Not Yet Wild
Join Date: Aug 2011
Posts: 16
|
Ezgo dcs 1997
I have a 1997 ezgo dcs i was trying loading it in the truck and got almost to the top of the ramps and it stalled rolled it back off noew it wont do nothing any ideas? From digrams it says reed switch or controller I find it hard to belive the controller went out by trying to load it.Help Thank You in advanced
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-07-2012, 06:47 AM | #2 |
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Re: Ezgo dcs 1997
does the back-up buzzer still come on in reverse?
|
09-07-2012, 07:49 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Ezgo dcs 1997
If the battery charge was low it is a definite possibility. Assuming you have a stock controller.
When the voltage drops the motor draws greater amounts of amperage, this amount can be excessive, especially under load. High amperage draw creates heat and the heat cooks the controller components. This is the flaw of the DCS system. Luckily the aftermarket controllers have this problem corrected with a low voltage cut off. |
09-07-2012, 08:23 AM | #4 |
Not Yet Wild
Join Date: Aug 2011
Posts: 16
|
Re: Ezgo dcs 1997
the buzzer does not work the have been pulled out.
|
09-07-2012, 08:30 AM | #5 |
Not Yet Wild
Join Date: Aug 2011
Posts: 16
|
Re: Ezgo dcs 1997
Should I check the motor?
|
09-07-2012, 08:35 AM | #6 |
Not Yet Wild
Join Date: Aug 2011
Posts: 16
|
Re: Ezgo dcs 1997
There is one thing that bugs me when I hook the reed switch to the B+ the selenod clicks when you move from foward to reverse any ideas. I unhooked the battery cables at the end that goes to controller and went to rehook and it sparked big should that happen.I have taken cables off one by one and never go a arc before
|
09-07-2012, 08:51 AM | #7 |
Gone Wild
Join Date: Jun 2011
Location: Florida
Posts: 516
|
Re: Ezgo dcs 1997
Ideas? Yup, send the motor to Plum Quick and have it rebuilt, and put an Alltrax DCX400 controller and you will be back up and running. Running about 7 -10mph faster than before too.
I went through a similar event with my DCS. |
09-07-2012, 09:07 AM | #8 |
Not Yet Wild
Join Date: Aug 2011
Posts: 16
|
Re: Ezgo dcs 1997
is there anyway to check the motor?
|
09-07-2012, 12:04 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Ezgo dcs 1997
The motor is the last thing to go and usually not suddenly unless at high speed... Does the solenoid click when you try to go?
|
09-07-2012, 02:13 PM | #10 |
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Re: Ezgo dcs 1997
sounds like a faulty microswitch in the pedal box if your getting a solenoid click without hitting the pedal....
|
Tags |
problems |
|
|
Similar Threads | ||||
Thread | Forum | |||
1997 ezgo | Electric EZGO | |||
1997 ezgo txt | Gas EZGO | |||
1997 EZGO gas 1997 not firing | Gas EZGO | |||
1997 ezgo | Gas EZGO | |||
1997 EZGO TXT | Electric EZGO |