|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-08-2012, 07:27 PM
|
#1 |
|
Getting Wild
Join Date: Mar 2012
Location: TX
Posts: 117
|
No-Go Sometimes Solved!
I found the problem with the cart not going sometimes after ridden for a while. The Solenoid was getting pretty hot, and even though it was a brand new 200a HD one, I replaced it with the 400a one. PROBLEM SOLVED! I broke off one of the small terminals by overtightening it, but soldered it. It should hold until I can exchange it. I took apart the 200a solenoid to see what was wrong, and only found one small burn mark on a copper disk. This problem occured after I changed some battery cables out, with the main cables still connected to the controller and solenoid. Either the new cables carried alot more current, and caused the heat. Or, I messed up the resistor, diode, or solenoid. Either way, She's working now!!!!!! 48v's here I come!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-08-2012, 07:59 PM
|
#2 |
|
Gone Wild
Join Date: Jul 2012
Location: Sw Florida
Posts: 298
|
Re: No-Go Sometimes Solved!
Nice , always good to solve a problem !
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Clone Shifter problem solved yet? | Clone Engine Swaps | |||
| Re: Yamaha G8 Electrical issue solved....speed probs. | Electric Yamaha | |||
| 4:1 gear mystery SOLVED! at least 4 me... | Golf Cart Racing | |||
| is this a controller problem solved | Electric Club Car | |||
| Problem solved!!! | Electric Club Car | |||
Linear Mode
