|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-10-2012, 01:52 PM | #1 |
Gone Wild
Join Date: Mar 2011
Posts: 245
|
DC Converter, KSI connection?
I have a 48V to 12V DC Converter with no instruction manual etc. There are four wires coming out of it.
1. Black - Common - 2. Red - Input + (48V) 3. Yellow - Output + (12V) 4. Green - KSI I can only assume KSI is for the key switch interface, or a switch which tells the converter to turn on. I have a 2007 Shuttle 6 with the PDS II controller. Where do I connect this wire? Does it need a full 48V to trigger the converter on? I read some post regarding a KSI input on the Curtis Controllers, can I connect there if that connection exists on my controller? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
connection rod bearing | Gas EZGO | |||
Need Help W/ Connection to Igniter | Gas Yamaha | |||
G16 losing connection | Gas Yamaha | |||
A2 connection | Electric Club Car | |||
A1 connection | Electric EZGO |