|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-19-2012, 05:44 PM | #1 |
Getting Wild
Join Date: May 2012
Posts: 75
|
replaced marathon floor steel now potbox reading 3500ohm instead of 5000
i replaced my steel floor in 93 marathon and thought i got accelerator pedal back in right spot , cart feels weak and pot box wires on controller black to white only ohm around 3200 ohm when fully pressed, will this make me run slower. how to correct?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-19-2012, 06:03 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: replaced marathon floor steel now potbox reading 3500ohm instead of 5000
Marathon has 2 pairs of wires coming from the POT. One set sends the ohm signal to the control. The other set reduces the ohm signal. Where is the second set and are they connected in any way?
|
10-19-2012, 07:09 PM | #3 |
Getting Wild
Join Date: May 2012
Posts: 75
|
Re: replaced marathon floor steel now potbox reading 3500ohm instead of 5000
the second set are not connected
|
10-19-2012, 07:58 PM | #4 |
Astronautilator
Join Date: Sep 2011
Location: North Idaho
Posts: 1,494
|
Re: replaced marathon floor steel now potbox reading 3500ohm instead of 5000
Even though you replaced the floor panel, the mount for the pedal shouldn't have changed. The rod, under the floor is adjustable. If you need to adjust it the ball end at the controller is a quick disconnect type of ball end. You simply pull the neck of the rod end connection back to unhook it from the controller stuffs/mechanicals. Then with two wrenches you undo the jamn nut on the rod and shorten it a bit so it pulls more so you get up into the 5k ohms region.
Hope that helps. |
10-19-2012, 08:00 PM | #5 |
Astronautilator
Join Date: Sep 2011
Location: North Idaho
Posts: 1,494
|
Re: replaced marathon floor steel now potbox reading 3500ohm instead of 5000
Of course I forgot to mention to follow the book on your cart and make sure your PoT and switches are all set up correctly.
Good luck and keep us informed. Shon |
10-19-2012, 08:16 PM | #6 |
Getting Wild
Join Date: May 2012
Posts: 75
|
Re: replaced marathon floor steel now potbox reading 3500ohm instead of 5000
yeah my bracket that the pedal mounted too was completely rusted away so i just mounted my pedal to my floor that i thickened up in that spot. the rod is adjustable , i can adjust to achieve the 5500ohm reading, is the reason my cart is running slow because its only going up to 3000ohm or does that not affect the speed or power of the motor.
|
10-19-2012, 08:21 PM | #7 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: replaced marathon floor steel now potbox reading 3500ohm instead of 5000
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Resistor cart converstion to potbox ... can somebody show pics? | Electric EZGO | |||
1985ish ez go marathon steel nose | Gas EZGO | |||
Use MCOR for a Potbox? | Electric Club Car | |||
potbox install | Electric Club Car |