Alltrax 500 amp

hooknup · 10-22-2012, 10:17 AM

I just installed an alltrax controller w/Solienoid on my pds cart. The following mods were in place before the new controller:
4gauge cables
22 inch tires
PQ Bandit motor

Before the controller upgrade I was making 23-24 on flat surface. After the controller the torque is much improved but It seems it struggles to get to 21 or 22. Is there a setting in the controller that would limit my top speed?

thanks

scottyb · 10-22-2012, 10:28 AM

There is, How are the settings set?

hooknup · 10-22-2012, 10:39 AM

Scotty this is Brett from Fairhope. You sent the controller to me last week. I dont have the sheet in front of me.

scottyb · 10-22-2012, 10:50 AM

The controller is set to full power and full speed. The turbo is off and the brake current is set to 0 per PQ's instruction.
My PDS cart with a stock motor is getting 22-24 mph with the alltrax control.

hooknup · 10-22-2012, 10:54 AM

Thanks. I dont know what could be going on. I will make a few more test runs tonight when I get home.

scottyb · 10-22-2012, 11:02 AM

I see I recommended 2g cables and you have 4g. I doubt if that could be making a speed restriction? Maybe give PQ a call with the controller program in front of you ?

Also check your battery pack voltage at wide open and see how far down it is dropping.... a big drop would reduce rpms.

hooknup · 10-22-2012, 11:15 AM

How can I test the voltage at wide open throttle. Can I leave the cart in neutral and press pedal?

10-22-2012, 10:17 AM	#1
hooknup Not Yet Wild Join Date: Feb 2012 Posts: 46	Alltrax 500 amp I just installed an alltrax controller w/Solienoid on my pds cart. The following mods were in place before the new controller: 4gauge cables 22 inch tires PQ Bandit motor Before the controller upgrade I was making 23-24 on flat surface. After the controller the torque is much improved but It seems it struggles to get to 21 or 22. Is there a setting in the controller that would limit my top speed? thanks
hooknup Not Yet Wild Join Date: Feb 2012 Posts: 46

10-22-2012, 10:28 AM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: Alltrax 500 amp There is, How are the settings set?

10-22-2012, 10:39 AM	#3
hooknup Not Yet Wild Join Date: Feb 2012 Posts: 46	Re: Alltrax 500 amp Scotty this is Brett from Fairhope. You sent the controller to me last week. I dont have the sheet in front of me.
hooknup Not Yet Wild Join Date: Feb 2012 Posts: 46

10-22-2012, 10:54 AM	#5
hooknup Not Yet Wild Join Date: Feb 2012 Posts: 46	Re: Alltrax 500 amp Thanks. I dont know what could be going on. I will make a few more test runs tonight when I get home.
hooknup Not Yet Wild Join Date: Feb 2012 Posts: 46

10-22-2012, 11:02 AM	#6
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: Alltrax 500 amp I see I recommended 2g cables and you have 4g. I doubt if that could be making a speed restriction? Maybe give PQ a call with the controller program in front of you ? Also check your battery pack voltage at wide open and see how far down it is dropping.... a big drop would reduce rpms.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

10-22-2012, 11:15 AM	#7
hooknup Not Yet Wild Join Date: Feb 2012 Posts: 46	Re: Alltrax 500 amp How can I test the voltage at wide open throttle. Can I leave the cart in neutral and press pedal?
hooknup Not Yet Wild Join Date: Feb 2012 Posts: 46

Similar Threads
Thread	Forum
Alltrax dcx 600	Golf Carts and Parts
500 amp alltrax	Extreme DC!
alltrax	Extreme DC!
Alltrax 650	Extreme DC!
Alltrax 400 amp for PDS	Electric EZGO